[Just a quick review, mostly about coding style. If it works, I ACK this.]
On Thu, 02 Aug 2007 10:53:11 -0500
Larry Finger <[EMAIL PROTECTED]> wrote:
> +#define BCM43xx_RX_MAX_SSI 60
A comment here wouldn't hurt.
> /* MMIO offsets */
> #define BCM43xx_MMIO_DMA0_REASON 0x20
> @@ -45,6 +39,7 @@
> #define BCM43xx_MMIO_DMA4_IRQ_MASK 0x44
> #define BCM43xx_MMIO_DMA5_REASON 0x48
> #define BCM43xx_MMIO_DMA5_IRQ_MASK 0x4C
> +#define BCM43xx_MMIO_MACCTL 0x120
> #define BCM43xx_MMIO_STATUS_BITFIELD 0x120
> #define BCM43xx_MMIO_STATUS2_BITFIELD 0x124
> #define BCM43xx_MMIO_GEN_IRQ_REASON 0x128
> @@ -83,6 +78,7 @@
>
> #define BCM43xx_MMIO_PHY_VER 0x3E0
> #define BCM43xx_MMIO_PHY_RADIO 0x3E2
> +#define BCM43xx_MMIO_PHY0 0x3E6
> #define BCM43xx_MMIO_ANTENNA 0x3E8
> #define BCM43xx_MMIO_CHANNEL 0x3F0
> #define BCM43xx_MMIO_CHANNEL_EXT 0x3F4
> @@ -93,6 +89,7 @@
> #define BCM43xx_MMIO_PHY_DATA 0x3FE
> #define BCM43xx_MMIO_MACFILTER_CONTROL 0x420
> #define BCM43xx_MMIO_MACFILTER_DATA 0x422
> +#define BCM43xx_MMIO_RCMTA_COUNT 0x43C
Ditto, the meaning of RCMTA isn't obvious.
> /* PHYVersioning */
> -#define BCM43xx_PHYTYPE_A 0x00
So OK, let's remove support for A PHYs. I never got done with it and maybe it
had to be rewritten from scratch anyway.
> +#define BCM43xx_IRQ_TBTT_INDI 0x00000004
A comment here would be nice.
> #define BCM43xx_INTERFSTACK_SIZE 26
> - u32 interfstack[BCM43xx_INTERFSTACK_SIZE];
> + u32 interfstack[BCM43xx_INTERFSTACK_SIZE];/* FIXME: use a data
> struct */
Why?
> +/* Data structure for the WLAN parts (802.11 cores) of the bcm43xx chip.
> */ +struct bcm43xx_wl {
> + /* Pointer to the active wireless device on this chip */
> + struct bcm43xx_wldev *current_dev;
> + /* Pointer to the ieee80211 hardware data structure */
> + struct ieee80211_hw *hw;
> +
> + spinlock_t irq_lock; /* locks IRQ */
> + struct mutex mutex; /* locks ? */
What?
> - atomic_set(&(bcm)->init_status, (stat)); \
> + BCM43xx_STAT_UNINIT = 0, /* Uninitialized. */
> + BCM43xx_STAT_INITIALIZED = 1, /* Initialized, not yet
> started */
"Initialized, not yet started."
> -/* *** THEORY OF LOCKING ***
> +/* XXX--- HOW LOCKING WORKS IN BCM43xx ---XXX
I'd prefer "***" but this isn't relevant. :)
> +struct bcm43xx_wldev {
> + struct ssb_device *dev;
> + struct bcm43xx_wl *wl;
> +
> + /* The device initialization status.
> + * Use bcm43xx_status() to query. */
> + atomic_t __init_status;
> + /* Saved init status for handling suspend. */
> + int suspend_init_status;
> +
> + bool __using_pio; /* iUse bcm43xx_using_pio(). */
An evolution of the iRack? :P
> + bool bad_frames_preempt; /* Use "Bad Frames Preemption" */
Dot at the end.
> + bool reg124_set_0x4; /* Variable to keep track of
> IRQ */
Ditto.
> + bool short_preamble; /* TRUE if short preamble
> enabled. */
"True".
> + bool short_slot; /* TRUE if short slot timing
> enabled. */
Ditto.
> + bool radio_hw_enable; /* state of radio hardware
> enable bit */
"State of the radio hardware enable bit."
> +/* Macros for printing a value in Q5.2 format */
> +#define Q52_FMT "%u.%u"
> +#define Q52_ARG(q52) ((q52) / 4), ((((q52) & 3) * 100) / 4)
#define Q52_ARG(q52) ((q52) / 4), (((q52) & 3) * 100 / 4)
--
Ciao
Stefano
--
Ciao
Stefano
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
