Hello, If I just need to buy a new card just let me know. The card does NOT work in Window any more. But I'm curious.
I have a Broadcom card that reports itself as the 14e4:4320, 4320 which I understand to mean 4306. In the past I successfully used this card under Linux using both ndiswrapper and the bcm43xx driver. I would assume it worked under Windows then as well, I never tried until now when it does not work under ndiswrapper, bcm43xx or Windows. I had a hard drive failure which required opening up the computer and it's possible the hard drive failed due to humidity (The computer was left by an open window during a rain storm while it was on. However the computer stayed on that whole time and was shut down normally. It was a few days later when I tried to turn it on that the hard drive stopped working). Perhaps this is related to the card failure as well, or perhaps static discharge while I was inside the notebook. Using the BCM43xx driver I initially get the "Could not determine Chip ID" error. Manually overriding the chip_id to be 0x4306 gets past that error, but then it fails to read core #2. The first two cores look wrong as well (Core 0 is reported as ID 0x34 Rev 0x51 vendor 0x314e). Finally I outputted the value of sb_id_hi and it appears to be 0xFFFFFFFF. So perhaps I should just buy a new card. But perhaps I could hack the driver to work enough to dump the ssb_sprom and then see if that could be repaired? Thanks for the help. And thanks for the excellent driver. _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
