Ralf Saalmueller wrote: > Hello to the dev team and thank you very much for your work. > > First I like to tell: I have the firmware installed: > /lib/firmware/b43# ls > a0g0bsinitvals4.fw a0g1bsinitvals5.fw b0g0bsinitvals5.fw > lp0initvals13.fw ucode4.fw a0g0bsinitvals5.fw a0g1initvals13.fw > b0g0initvals13.fw pcm4.fw ucode5.fw a0g0initvals4.fw > a0g1initvals5.fw b0g0initvals4.fw pcm5.fw a0g0initvals5.fw > b0g0bsinitvals13.fw b0g0initvals5.fw ucode11.fw > a0g1bsinitvals13.fw b0g0bsinitvals4.fw lp0bsinitvals13.fw ucode13.fw > > I have an Apple PowerBook G4: > processor : 0 > cpu : 7447A, altivec supported > clock : 1666.666000MHz > revision : 0.5 (pvr 8003 0105) > bogomips : 33.15 > timebase : 8320000 > platform : PowerMac > machine : PowerBook5,8 > motherboard : PowerBook5,8 MacRISC3 Power Macintosh > detected as : 287 (PowerBook G4 15") > pmac flags : 00000019 > L2 cache : 512K unified > pmac-generation : NewWorld > > Running debian etch 4.0r1. > > I have searched the internet and found nothing that handles the error > when the firmware is installed. I haven't found an entry in your > mailing list either. Sorry if I haven't found it. > > Further more, I haven't found a how to configure the bcm43xx module. > > The debian packet missed to get a firmware with the right md5 and I > haven't had any luck with the 008 version from berlios until I looked > into the source and found some urls. After that b43-fwcutter worked > without an error. > > But the bcm43xx modules doesn't work, and I guess the firmware can't be > found. Where does it look for it?
With bcm43xx, the firmware must be in /lib/firmware. For it, you need to use bcm43xx-fwcutter. In addition, you need V3 firmware. Larry _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
