On Tuesday 06 November 2007 20:17:00 Larry Finger wrote:
> Patch 6 of 6.
>
> The old, now unused, data structures and SPROM extraction routines
> are removed.
>
> Signed-off-by: Larry Finger<[EMAIL PROTECTED]>
> ---
>
> Index: wireless-2.6/include/linux/ssb/ssb.h
> ===================================================================
> --- wireless-2.6.orig/include/linux/ssb/ssb.h
> +++ wireless-2.6/include/linux/ssb/ssb.h
> @@ -15,69 +15,6 @@ struct pcmcia_device;
> struct ssb_bus;
> struct ssb_driver;
>
> -
> -struct ssb_sprom_r1 {
> - u16 pci_spid; /* Subsystem Product ID for PCI */
> - u16 pci_svid; /* Subsystem Vendor ID for PCI */
> - u16 pci_pid; /* Product ID for PCI */
> - u8 il0mac[6]; /* MAC address for 802.11b/g */
> - u8 et0mac[6]; /* MAC address for Ethernet */
> - u8 et1mac[6]; /* MAC address for 802.11a */
> - u8 et0phyaddr:5; /* MII address for enet0 */
> - u8 et1phyaddr:5; /* MII address for enet1 */
> - u8 et0mdcport:1; /* MDIO for enet0 */
> - u8 et1mdcport:1; /* MDIO for enet1 */
> - u8 board_rev; /* Board revision */
> - u8 country_code:4; /* Country Code */
> - u8 antenna_a:2; /* Antenna 0/1 available for A-PHY */
> - u8 antenna_bg:2; /* Antenna 0/1 available for B-PHY and G-PHY */
> - u16 pa0b0;
> - u16 pa0b1;
> - u16 pa0b2;
> - u16 pa1b0;
> - u16 pa1b1;
> - u16 pa1b2;
> - u8 gpio0; /* GPIO pin 0 */
> - u8 gpio1; /* GPIO pin 1 */
> - u8 gpio2; /* GPIO pin 2 */
> - u8 gpio3; /* GPIO pin 3 */
> - u16 maxpwr_a; /* A-PHY Power Amplifier Max Power (in dBm
> Q5.2) */
> - u16 maxpwr_bg; /* B/G-PHY Power Amplifier Max Power (in dBm
> Q5.2) */
> - u8 itssi_a; /* Idle TSSI Target for A-PHY */
> - u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
> - u16 boardflags_lo; /* Boardflags (low 16 bits) */
> - u8 antenna_gain_a; /* A-PHY Antenna gain (in dBm Q5.2) */
> - u8 antenna_gain_bg; /* B/G-PHY Antenna gain (in dBm Q5.2) */
> - u8 oem[8]; /* OEM string (rev 1 only) */
> -};
> -
> -struct ssb_sprom_r2 {
> - u16 boardflags_hi; /* Boardflags (high 16 bits) */
> - u8 maxpwr_a_lo; /* A-PHY Max Power Low */
> - u8 maxpwr_a_hi; /* A-PHY Max Power High */
> - u16 pa1lob0; /* A-PHY PA Low Settings */
> - u16 pa1lob1; /* A-PHY PA Low Settings */
> - u16 pa1lob2; /* A-PHY PA Low Settings */
> - u16 pa1hib0; /* A-PHY PA High Settings */
> - u16 pa1hib1; /* A-PHY PA High Settings */
> - u16 pa1hib2; /* A-PHY PA High Settings */
> - u8 ofdm_pwr_off; /* OFDM Power Offset from CCK Level */
> - u8 country_str[2]; /* Two char Country Code */
> -};
> -
> -struct ssb_sprom_r3 {
> - u32 ofdmapo; /* A-PHY OFDM Mid Power Offset */
> - u32 ofdmalpo; /* A-PHY OFDM Low Power Offset */
> - u32 ofdmahpo; /* A-PHY OFDM High Power Offset */
> - u8 gpioldc_on_cnt; /* GPIO LED Powersave Duty Cycle ON count */
> - u8 gpioldc_off_cnt; /* GPIO LED Powersave Duty Cycle OFF count */
> - u8 cckpo_1M:4; /* CCK Power Offset for Rate 1M */
> - u8 cckpo_2M:4; /* CCK Power Offset for Rate 2M */
> - u8 cckpo_55M:4; /* CCK Power Offset for Rate 5.5M */
> - u8 cckpo_11M:4; /* CCK Power Offset for Rate 11M */
> - u32 ofdmgpo; /* G-PHY OFDM Power Offset */
> -};
> -
> struct ssb_sprom_data {
> u8 il0mac[6]; /* MAC address for 802.11b/g */
> u8 et0mac[6]; /* MAC address for Ethernet */
> @@ -109,16 +46,6 @@ struct ssb_sprom_data {
> struct ssb_sprom {
> u8 revision;
> u8 crc;
> - /* The valid r# fields are selected by the "revision".
> - * Revision 3 and lower inherit from lower revisions.
> - */
> - union {
> - struct {
> - struct ssb_sprom_r1 r1;
> - struct ssb_sprom_r2 r2;
> - struct ssb_sprom_r3 r3;
> - };
> - };
> struct ssb_sprom_data data;
> };
I'd also like to get rid of the "revision" and "crc" fields, as they
are of no use to drivers. So you can rename struct ssb_sprom_data
to struct ssb_sprom and remove the old struct ssb_sprom.
If that creates problems with merging (bisect), just create one big patch.
I like big patches more than hundreds of small ones that change this
and that and in the end revert everything, just for the sake of
having multiple patches. :)
--
Greetings Michael.
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
