Add boardflags-high.
Signed-off-by: Michael Buesch <[EMAIL PROTECTED]>
---
For 2.6.25
Index: wireless-2.6/drivers/ssb/pci.c
===================================================================
--- wireless-2.6.orig/drivers/ssb/pci.c 2008-01-09 16:59:33.000000000 +0100
+++ wireless-2.6/drivers/ssb/pci.c 2008-01-13 21:01:14.000000000 +0100
@@ -374,12 +374,14 @@ static void sprom_extract_r123(struct ss
SSB_SPROM1_MAXPWR_A_SHIFT);
SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
SSB_SPROM1_ITSSI_A_SHIFT);
SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+ if (out->revision >= 2)
+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
/* Extract the antenna gain values. */
gain = r123_extract_antgain(out->revision, in,
SSB_SPROM1_AGAIN_BG,
SSB_SPROM1_AGAIN_BG_SHIFT);
out->antenna_gain.ghz24.a0 = gain;
@@ -415,12 +417,13 @@ static void sprom_extract_r4(struct ssb_
}
SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
SSB_SPROM4_ETHPHY_ET1A_SHIFT);
SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
SSB_SPROM4_ANTAVAIL_A_SHIFT);
SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
SSB_SPROM4_ANTAVAIL_BG_SHIFT);
SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
Index: wireless-2.6/include/linux/ssb/ssb.h
===================================================================
--- wireless-2.6.orig/include/linux/ssb/ssb.h 2008-01-09 16:59:33.000000000
+0100
+++ wireless-2.6/include/linux/ssb/ssb.h 2008-01-13 21:00:39.000000000
+0100
@@ -40,12 +40,13 @@ struct ssb_sprom {
u8 gpio3; /* GPIO pin 3 */
u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */
u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
u8 itssi_a; /* Idle TSSI Target for A-PHY */
u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
u16 boardflags_lo; /* Boardflags (low 16 bits) */
+ u16 boardflags_hi; /* Boardflags (high 16 bits) */
/* Antenna gain values for up to 4 antennas
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
* loss in the connectors is bigger than the gain. */
struct {
struct {
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
