On Wednesday, 23 of January 2008, Celejar wrote: > Hi, Hi, > I know there's an ongoing long thread about suspend in b43, but > the technical level has been above me, and I don't know if anything > there is relevant to me. > > When I suspend to disk ('s2disk' from uswsusp), the resume fails if b43 > is loaded. The screen stays blank, although I see a cursor flashing. > 'modprobe -r b43' before suspending makes the resume work fine, but if I > subsequently load b43 after the resume the machine freezes.
Hm, I use b43 w/ s2disk on a regular basis and it works, but openSUSE has a userland suspend hook that disables NetworkManager before a suspend. > I am using Debian Sid, b43 from vanilla kernels from kernel.org (2.6.24 > isn't in Debian yet). I have had this problem with -rc4 and -rc8. the > only two I've tried. HW is a 4318 Air Force One, in an Acer Aspire > 3690-2672. Is there any debugging info I can provide? Is this a known > problem? Is there anything I should try? Please try to switch off the interface before suspend without unloading the module. Also, does s2ram work on your box? Rafael _______________________________________________ Bcm43xx-dev mailing list Bcm43xx-dev@lists.berlios.de https://lists.berlios.de/mailman/listinfo/bcm43xx-dev