Thanks Larry, it worked. I'm sorry for the delay, but it was my first time compiling kernel in Ubuntu's way, I did it many times in Gentoo, but's very different. Thanks again guys for your job :) Best regards,
Emiliano 2008/2/3, Larry Finger <[EMAIL PROTECTED]>: > > Emiliano Moscato wrote: > > Hi, > > > > I spent the whole day trying to get b43 driver working in my hp tx1000z > > with Kubuntu-64 Hardy (kernel 2.6.24). > > I followed: > > http://linuxwireless.org/en/users/Drivers/b43 (for b43 and kernel 2.6.24 > ) > > and this thread: > > http://lists.berlios.de/pipermail/bcm43xx-dev/2007-December/006590.html > > > > It was working with ndiswrapper. The only way I got b43 working was > > blacklisting b43, ssb and ohci_hcd, unloading ndiswrapper and loading > > b43. Any other way I get the following error: when trying 'modprobe > > b43', it ends smoothly, but network is not working, and when I look at > > dmesg I found: > > > > [ 57.005286] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 11 > > [ 57.005344] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI > > 11 (level, low) -> IRQ 11 > > [ 57.005484] PCI: Setting latency timer of device 0000:03:00.0 to 64 > > [ 57.062445] WARNING: at > > /build/buildd/linux-2.6.24/drivers/ssb/main.c:883 > > ssb_tmslow_reject_bitmask() > > [ 57.062515] Pid: 4296, comm: modprobe Tainted: P > > 2.6.24-5-generic #1 > > [ 57.062568] > > [ 57.062568] Call Trace: > > [ 57.062682] [<ffffffff888af8ca>] > > :ssb:ssb_tmslow_reject_bitmask+0x4a/0x60 > > [ 57.062739] [<ffffffff888b0316>] > :ssb:ssb_device_is_enabled+0x16/0x50 > > [ 57.062797] [<ffffffff888b2731>] :ssb:ssb_pcicore_init+0x21/0x70 > > [ 57.062853] [<ffffffff888af656>] > > :ssb:ssb_attach_queued_buses+0x106/0x2d0 > > [ 57.062916] [<ffffffff888b1250>] > :ssb:ssb_pci_get_invariants+0x0/0x2d0 > > [ 57.062972] [<ffffffff888afd0e>] :ssb:ssb_bus_register+0x17e/0x200 > > [ 57.063041] [<ffffffff888afe22>] > :ssb:ssb_bus_pcibus_register+0x32/0x60 > > [ 57.063098] [<ffffffff888b1cdd>] :ssb:ssb_pcihost_probe+0x7d/0xc0 > > [ 57.063156] [<ffffffff80358278>] pci_device_probe+0xf8/0x170 > > [ 57.063214] [<ffffffff803b8d7c>] driver_probe_device+0x9c/0x1b0 > > [ 57.063270] [<ffffffff803b9049>] __driver_attach+0xc9/0xd0 > > [ 57.063323] [<ffffffff803b8f80>] __driver_attach+0x0/0xd0 > > [ 57.063376] [<ffffffff803b7fbd>] bus_for_each_dev+0x4d/0x80 > > [ 57.063434] [<ffffffff803b83cc>] bus_add_driver+0xac/0x220 > > [ 57.063489] [<ffffffff803584f9>] __pci_register_driver+0x69/0xb0 > > [ 57.063546] [<ffffffff8805d052>] :ssb:ssb_modinit+0x52/0x80 > > [ 57.063601] [<ffffffff80263a3e>] sys_init_module+0x18e/0x1a90 > > [ 57.063671] [<ffffffff803b85f0>] bus_register+0x0/0x270 > > [ 57.063731] [<ffffffff8020c37e>] system_call+0x7e/0x83 > > [ 57.063791] > > [ 57.063890] ssb: Sonics Silicon Backplane found on PCI device > > The above error indicates that your copy of 2.6.24 has not been patched to > handle the BCM94311 rev > 2. This device will not be supported by mainline kernels until 2.6.25-rc1. > You should apply the > patch at http://linuxwireless.org/download/b43/patch_2.6.24_for_4311_2. > > Larry > -- mOsKi "No hay nada que uno haga mal , lo que hay es poco vino." Autor Anonimo
_______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
