Hi people I have a bcm4311 on hp nx7400: 10:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI (rev 01)
I use a vanilla 2.6.24.4 that the radio button do not change the radio status of my card. Also, do not show the "radio hardware enable/disable" on the dmesg (with the debug options enabled) i have the debian testing stock kernel 2.6.24-1-686 and diff my config with this and found that in the debian kernel has CONFIG_B43_RFKILL=y can my .config has error? can i forgot enable something? ------- [EMAIL PROTECTED]:~$ lsmod|grep 43 b43 126116 0 mac80211 143188 1 b43 led_class 5060 1 b43 snd_hda_intel 264348 3 firmware_class 9344 1 b43 rng_core 4868 1 b43 ssb 28356 2 b43,b44 [EMAIL PROTECTED]:~$ lsmod|grep kill rfkill_input 4416 0 rfkill 7248 1 rfkill_input [EMAIL PROTECTED]:~$ b43-phy2: Broadcom 4311 WLAN found b43-phy2 debug: Found PHY: Analog 4, Type 2, Revision 8 b43-phy2 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2 phy2: Selected rate control algorithm 'simple' b43-phy2 debug: Loading firmware version 351.126 (2006-07-29 05:54:02) b43-phy2 debug: Chip initialized b43-phy2 debug: 32-bit DMA initialized Registered led device: b43-phy2:tx Registered led device: b43-phy2:rx b43-phy2 debug: Wireless interface started b43-phy2 debug: Adding Interface type 2 ADDRCONF(NETDEV_UP): wlan0: link is not ready Is very extrange, but in latest bcm43xx (previous kernels) it was work. in the change to bcm43xx to b43 i lost this feature. Another issue that i can detect is the follow: On a network with two ap's with same essid, is very difficult to connect i think that the roaming from one ap to another is fail. i will try to send output when i connect to that network in next weekend thanks all. -- Dock Sud BBS http://www.docksud.com.ar telnet://bbs.docksud.com.ar
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
