Francesco Gringoli wrote: > > do you mind testing this firmware? It's not the solution, but can help > us understanding if we should follow this way. Download at > http://www.ing.unibs.it/~gringoli/fwtest.tar.gz > > Before using this firmware please recompile b43 changing these two > definitions in b43.h > > #define B43_MARKER_ID_REG 52 > #define B43_MARKER_LINE_REG 53 > > I coded the firmware so that it will raise a B43_DEBUGIRQ_MARKER with id > 10, line 100 if the condition I'm thinking to is true. You will see (I > hope) in dmesg.
I ran the test firmware until there was a failure. The B43_DEBUGIRQ_MARKER was not present in the dmesg output. I also did as Michael suggested and preserved the depth of the tx_status queue, as well as the maximum depth observed. The latter value is 16; therefore, it is possible that the queue is being overrun. It is certainly full if the limit really is 16. I still need to look at the detailed data from the last run, but it is late here today. Larry _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
