On Apr 9, 2009, at 12:18 PM, Michael Buesch wrote:
> On Wednesday 08 April 2009 02:11:16 Michael Buesch wrote:
>> Completely untested patch to implement firmware capabilities
>> and automagic QoS-disabling.
>>
>
> So could somebody who uses opensource fw test this?
>
> Module parameter qos=0 should not be needed anymore. So please test
> opensource fw
> with qos=1.
Hi Michael,
cool! These are excerpts from dmesg. All the times connectivity was ok.
Cheers,
-FG
modprobe b43 qos=0
[ 194.368042] b43-phy1: Loading OpenSource firmware version 410.31754
[ 194.368054] b43-phy1: Hardware crypto acceleration not supported by
firmware
[ 194.368060] b43-phy1: QoS not supported by firmware
modprobe b43
[ 264.328047] b43-phy3: Loading OpenSource firmware version 410.31754
[ 264.328058] b43-phy3: Hardware crypto acceleration not supported by
firmware
[ 264.328064] b43-phy3: QoS not supported by firmware
modprobe b43 qos=1
[ 309.224044] b43-phy5: Loading OpenSource firmware version 410.31754
[ 309.224056] b43-phy5: Hardware crypto acceleration not supported by
firmware
[ 309.224062] b43-phy5: QoS not supported by firmware
>
>
>
>> Index: wireless-testing/drivers/net/wireless/b43/b43.h
>> ===================================================================
>> --- wireless-testing.orig/drivers/net/wireless/b43/b43.h 2009-04-07
>> 19:52:34.000000000 +0200
>> +++ wireless-testing/drivers/net/wireless/b43/b43.h 2009-04-08
>> 01:57:58.000000000 +0200
>> @@ -163,6 +163,7 @@ enum {
>> #define B43_SHM_SH_WLCOREREV 0x0016 /* 802.11 core revision */
>> #define B43_SHM_SH_PCTLWDPOS 0x0008
>> #define B43_SHM_SH_RXPADOFF 0x0034 /* RX Padding data offset (PIO
>> only) */
>> +#define B43_SHM_SH_FWCAPA 0x0042 /* Firmware capabilities
>> (Opensource firmware only) */
>> #define B43_SHM_SH_PHYVER 0x0050 /* PHY version */
>> #define B43_SHM_SH_PHYTYPE 0x0052 /* PHY type */
>> #define B43_SHM_SH_ANTSWAP 0x005C /* Antenna swap threshold */
>> @@ -297,6 +298,10 @@ enum {
>> #define B43_HF_MLADVW 0x001000000000ULL /* N PHY ML ADV
>> workaround
>> (rev >= 13 only) */
>> #define B43_HF_PR45960W 0x080000000000ULL /* PR 45960
>> workaround
>> (rev >= 13 only) */
>>
>> +/* Firmware capabilities field in SHM (Opensource firmware only) */
>> +#define B43_FWCAPA_HWCRYPTO 0x0001
>> +#define B43_FWCAPA_QOS 0x0002
>> +
>> /* MacFilter offsets. */
>> #define B43_MACFILTER_SELF 0x0000
>> #define B43_MACFILTER_BSSID 0x0003
>> @@ -596,6 +601,13 @@ struct b43_wl {
>> /* Pointer to the ieee80211 hardware data structure */
>> struct ieee80211_hw *hw;
>>
>> + /* The number of queues that were registered with the mac80211
>> subsystem
>> + * initially. This is a backup copy of hw->queues in case hw-
>> >queues has
>> + * to be dynamically lowered at runtime (Firmware does not
>> support QoS).
>> + * hw->queues has to be restored to the original value before
>> unregistering
>> + * from the mac80211 subsystem. */
>> + u16 mac80211_initially_registered_queues;
>> +
>> struct mutex mutex;
>> spinlock_t irq_lock;
>> /* R/W lock for data transmission.
>> @@ -752,6 +764,8 @@ struct b43_wldev {
>> bool dfq_valid; /* Directed frame queue valid (IBSS PS mode,
>> ATIM) */
>> bool radio_hw_enable; /* saved state of radio hardware enabled
>> state */
>> bool suspend_in_progress; /* TRUE, if we are in a suspend/resume
>> cycle */
>> + bool qos_enabled; /* TRUE, if QoS is used. */
>> + bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is
>> enabled. */
>>
>> /* PHY/Radio device. */
>> struct b43_phy phy;
>> Index: wireless-testing/drivers/net/wireless/b43/dma.c
>> ===================================================================
>> --- wireless-testing.orig/drivers/net/wireless/b43/dma.c 2009-04-07
>> 19:58:22.000000000 +0200
>> +++ wireless-testing/drivers/net/wireless/b43/dma.c 2009-04-08
>> 01:53:56.000000000 +0200
>> @@ -1285,7 +1285,7 @@ static struct b43_dmaring *select_ring_b
>> {
>> struct b43_dmaring *ring;
>>
>> - if (b43_modparam_qos) {
>> + if (dev->qos_enabled) {
>> /* 0 = highest priority */
>> switch (queue_prio) {
>> default:
>> Index: wireless-testing/drivers/net/wireless/b43/main.c
>> ===================================================================
>> --- wireless-testing.orig/drivers/net/wireless/b43/main.c
>> 2009-04-07 19:55:03.000000000 +0200
>> +++ wireless-testing/drivers/net/wireless/b43/main.c 2009-04-08
>> 02:02:19.000000000 +0200
>> @@ -80,8 +80,8 @@ static int modparam_nohwcrypt;
>> module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
>> MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
>>
>> -int b43_modparam_qos = 1;
>> -module_param_named(qos, b43_modparam_qos, int, 0444);
>> +static int modparam_qos = 1;
>> +module_param_named(qos, modparam_qos, int, 0444);
>> MODULE_PARM_DESC(qos, "Enable QOS support (default on)");
>>
>> static int modparam_btcoex = 1;
>> @@ -538,6 +538,13 @@ void b43_hf_write(struct b43_wldev *dev,
>> b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
>> }
>>
>> +/* Read the firmware capabilities bitmask (Opensource firmware
>> only) */
>> +static u16 b43_fwcapa_read(struct b43_wldev *dev)
>> +{
>> + B43_WARN_ON(!dev->fw.opensource);
>> + return b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_FWCAPA);
>> +}
>> +
>> void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
>> {
>> u32 low, high;
>> @@ -2330,12 +2337,34 @@ static int b43_upload_microcode(struct b
>> dev->fw.patch = fwpatch;
>> dev->fw.opensource = (fwdate == 0xFFFF);
>>
>> + /* Default to use-all-queues. */
>> + dev->wl->hw->queues = dev->wl-
>> >mac80211_initially_registered_queues;
>> + dev->qos_enabled = !!modparam_qos;
>> + /* Default to firmware/hardware crypto acceleration. */
>> + dev->hwcrypto_enabled = 1;
>> +
>> if (dev->fw.opensource) {
>> + u16 fwcapa;
>> +
>> /* Patchlevel info is encoded in the "time" field. */
>> dev->fw.patch = fwtime;
>> - b43info(dev->wl, "Loading OpenSource firmware version
>> %u.%u%s\n",
>> - dev->fw.rev, dev->fw.patch,
>> - dev->fw.pcm_request_failed ? " (Hardware crypto not
>> supported)" : "");
>> + b43info(dev->wl, "Loading OpenSource firmware version %u.%u\n",
>> + dev->fw.rev, dev->fw.patch);
>> +
>> + fwcapa = b43_fwcapa_read(dev);
>> + if (!(fwcapa & B43_FWCAPA_HWCRYPTO) || dev-
>> >fw.pcm_request_failed) {
>> + b43info(dev->wl, "Hardware crypto acceleration not
>> supported by
>> firmware\n");
>> + /* Disable hardware crypto and fall back to software
>> crypto. */
>> + dev->hwcrypto_enabled = 0;
>> + }
>> + if (!(fwcapa & B43_FWCAPA_QOS)) {
>> + b43info(dev->wl, "QoS not supported by firmware\n");
>> + /* Disable QoS. Tweak hw->queues to 1. It will be
>> restored before
>> + * ieee80211_unregister to make sure the networking
>> core can
>> + * properly free possible resources. */
>> + dev->wl->hw->queues = 1;
>> + dev->qos_enabled = 0;
>> + }
>> } else {
>> b43info(dev->wl, "Loading firmware version %u.%u "
>> "(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
>> @@ -3626,7 +3655,7 @@ static int b43_op_set_key(struct ieee802
>> if (!dev || b43_status(dev) < B43_STAT_INITIALIZED)
>> goto out_unlock;
>>
>> - if (dev->fw.pcm_request_failed) {
>> + if (dev->fw.pcm_request_failed || !dev->hwcrypto_enabled) {
>> /* We don't have firmware for the crypto engine.
>> * Must use software-crypto. */
>> err = -EOPNOTSUPP;
>> @@ -4770,6 +4799,7 @@ static int b43_wireless_init(struct ssb_
>> b43err(NULL, "Could not allocate ieee80211 device\n");
>> goto out;
>> }
>> + wl = hw_to_b43_wl(hw);
>>
>> /* fill hw info */
>> hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
>> @@ -4783,7 +4813,8 @@ static int b43_wireless_init(struct ssb_
>> BIT(NL80211_IFTYPE_WDS) |
>> BIT(NL80211_IFTYPE_ADHOC);
>>
>> - hw->queues = b43_modparam_qos ? 4 : 1;
>> + hw->queues = modparam_qos ? 4 : 1;
>> + wl->mac80211_initially_registered_queues = hw->queues;
>> hw->max_rates = 2;
>> SET_IEEE80211_DEV(hw, dev->dev);
>> if (is_valid_ether_addr(sprom->et1mac))
>> @@ -4791,9 +4822,7 @@ static int b43_wireless_init(struct ssb_
>> else
>> SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
>>
>> - /* Get and initialize struct b43_wl */
>> - wl = hw_to_b43_wl(hw);
>> - memset(wl, 0, sizeof(*wl));
>> + /* Initialize struct b43_wl */
>> wl->hw = hw;
>> spin_lock_init(&wl->irq_lock);
>> rwlock_init(&wl->tx_lock);
>> @@ -4859,8 +4888,13 @@ static void b43_remove(struct ssb_device
>> cancel_work_sync(&wldev->restart_work);
>>
>> B43_WARN_ON(!wl);
>> - if (wl->current_dev == wldev)
>> + if (wl->current_dev == wldev) {
>> + /* Restore the queues count before unregistering, because
>> firmware detect
>> + * might have modified it. Restoring is important, so the
>> networking
>> + * stack can properly free resources. */
>> + wl->hw->queues = wl->mac80211_initially_registered_queues;
>> ieee80211_unregister_hw(wl->hw);
>> + }
>>
>> b43_one_core_detach(dev);
>>
>> Index: wireless-testing/drivers/net/wireless/b43/main.h
>> ===================================================================
>> --- wireless-testing.orig/drivers/net/wireless/b43/main.h
>> 2009-04-08 01:53:15.000000000 +0200
>> +++ wireless-testing/drivers/net/wireless/b43/main.h 2009-04-08
>> 01:53:20.000000000 +0200
>> @@ -39,7 +39,6 @@
>> #define PAD_BYTES(nr_bytes) P4D_BYTES( __LINE__ , (nr_bytes))
>>
>>
>> -extern int b43_modparam_qos;
>> extern int b43_modparam_verbose;
>>
>> /* Logmessage verbosity levels. Update the b43_modparam_verbose
>> helptext, if
>> Index: wireless-testing/drivers/net/wireless/b43/pio.c
>> ===================================================================
>> --- wireless-testing.orig/drivers/net/wireless/b43/pio.c 2009-04-08
>> 02:10:23.000000000 +0200
>> +++ wireless-testing/drivers/net/wireless/b43/pio.c 2009-04-08
>> 02:10:38.000000000 +0200
>> @@ -313,7 +313,7 @@ static struct b43_pio_txqueue *select_qu
>> {
>> struct b43_pio_txqueue *q;
>>
>> - if (b43_modparam_qos) {
>> + if (dev->qos_enabled) {
>> /* 0 = highest priority */
>> switch (queue_prio) {
>> default:
>>
>>
>
>
>
> --
> Greetings, Michael.
> _______________________________________________
> Bcm43xx-dev mailing list
> [email protected]
> https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
-------
Francesco Gringoli, PhD - Assistant Professor
Dept. of Electrical Engineering for Automation
University of Brescia
via Branze, 38
25123 Brescia
ITALY
Ph: ++39.030.3715843
FAX: ++39.030.380014
WWW: http://www.ing.unibs.it/~gringoli
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
