On Sunday 30 August 2009 17:10:23 Larry Finger wrote:
> Michael Buesch wrote:
> > On Sunday 30 August 2009 02:15:55 Gábor Stefanik wrote:
> >> static void lpphy_pr41573_workaround(struct b43_wldev *dev)
> >> {
> >> struct b43_phy_lp *lpphy = dev->phy.lp;
> >> @@ -1357,28 +1488,440 @@ static void lpphy_pr41573_workaround(struct
> >> b43_wldev *dev)
> >> b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140),
> >> saved_tab_size, saved_tab);
> >> }
> >> + b43_put_phy_into_reset(dev);
> >
> > Are you sure you really want this?
> > This function completely disables the PHY on the backplane and keeps the
> > physical
> > PHY reset pin asserted (even after return from the function).
> > So the PHY will physically be powered down from this point on. The following
> > PHY accesses could even hang the machine, because the PHY won't respond to
> > register accesses anymore.
> >
> > We currently only use this function on A/G Multi-PHY devices to permanently
> > hard-disable the PHY that's not used.
>
> The PHY reset routine in
> http://bcm-v4.sipsolutions.net/802.11/PHY/Reset, which I just updated
> for the latest N PHY changes, appears to be a different routine than
> b43_put_phy_into_reset(). The names are confusing.
b43_put_phy_into_reset() is opencoded in the specifications in various init
routines. There's no separate specs page for that function.
But I think the code is straightforward and easy to understand.
--
Greetings, Michael.
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
