On Monday 14 September 2009 23:01:33 Thomas Ilnseher wrote: > The current verison of b43 uses "b43_phyop_switch_analog_generic" for A, > G and LP phys. > > According to the spec, this is the wrong behaviour for the LP PHY > (see: http://bcm-v4.sipsolutions.net/802.11/PHY/Anacore ) > > While no problems on the x86 plattform where seen, this leads to a crash > on the BCM5354 SoC (MIPS 32 LE plattform). > This patch implements the analog switch for LP PHYs according to the > specs. It fixes the crash > > signed-off-by: Thomas Ilnseher <[email protected]> > --- > diff -uNr b/drivers/net/wireless/b43/phy_lp.c > a/drivers/net/wireless/b43/phy_lp.c > --- b/drivers/net/wireless/b43/phy_lp.c 2009-09-14 06:14:18.000000000 +0200 > +++ a/drivers/net/wireless/b43/phy_lp.c 2009-09-14 21:03:15.158507573 +0200 > @@ -2228,6 +2228,16 @@ > return B43_TXPWR_RES_DONE; > } > > +void b43_lpphy_op_switch_analog(struct b43_wldev *dev, bool on) > +{ > + if (on) { > + b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xfff8); > + } else { > + b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0x0007); > + b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 0x0007); > + } > +} > + > const struct b43_phy_operations b43_phyops_lp = { > .allocate = b43_lpphy_op_allocate, > .free = b43_lpphy_op_free, > @@ -2239,7 +2249,7 @@ > .radio_read = b43_lpphy_op_radio_read, > .radio_write = b43_lpphy_op_radio_write, > .software_rfkill = b43_lpphy_op_software_rfkill, > - .switch_analog = b43_phyop_switch_analog_generic, > + .switch_analog = b43_lpphy_op_switch_analog, > .switch_channel = b43_lpphy_op_switch_channel, > .get_default_chan = b43_lpphy_op_get_default_chan, > .set_rx_antenna = b43_lpphy_op_set_rx_antenna, >
ack -- Greetings, Michael. _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
