Hi,
I am using the b43 driver for my Apple Airport Extrem card (Powerbook
G4), firmware ucode5.fw. When I start some networking action (fe
minutes) the driver disconnects and tries to authenticate again. This
does not work. It is only able after rebooting. The issue is
reproducable all the time.
I have attached the info requested at:
http://linuxwireless.org/en/users/Drivers/b43#bug_reporting
Let me know if you need something else.
Regards,
Simon
uname -a: Linux kassiopeia 2.6.30-2-powerpc #1 Sat Oct 3 22:43:22 UTC
2009 ppc GNU/Linux
lspci -vvn|grep 43 -A7:
0001:10:12.0 0280: 14e4:4320 (rev 03)
Subsystem: 106b:004e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 16
Interrupt: pin A routed to IRQ 52
Region 0: Memory at 80084000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
--
Kernel driver in use: b43-pci-bridge
0001:10:17.0 ff00: 106b:003e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
--
0001:10:1b.0 0c03: 1033:0035 (rev 43) (prog-if 10 [OHCI])
Subsystem: 1033:0035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
--
0001:10:1b.1 0c03: 1033:0035 (rev 43) (prog-if 10 [OHCI])
Subsystem: 1033:0035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 63
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
dmesg: attached
[ 0.000000] Using PowerMac machine description
[ 0.000000] Total memory = 1280MB; using 4096kB for hash table (at cfc00000)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-2-powerpc (Debian 2.6.30-8) ([email protected]) (gcc version 4.3.4 (Debian 4.3.4-4) ) #1 Sat Oct 3 22:43:22 UTC 2009
[ 0.000000] Found initrd at 0xc1b00000:0xc23e1000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
[ 0.000000] Mapped at 0xff7c0000
[ 0.000000] Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: PowerBook G4
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] console [udbg0] enabled
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /p...@f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /p...@f2000000 (primary) ranges:
[ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.000000] PCI host bridge /p...@f4000000 ranges:
[ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=1186, gen1=1187
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x50000000, Total RAM: 0x50000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00030000
[ 0.000000] Normal 0x00030000 -> 0x00030000
[ 0.000000] HighMem 0x00030000 -> 0x00050000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00050000
[ 0.000000] On node 0 totalpages: 327680
[ 0.000000] free_area_init_node: node 0, pgdat c04a5578, node_mem_map c0538000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 195072 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1024 pages used for memmap
[ 0.000000] HighMem zone: 130048 pages, LIFO batch:31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 325120
[ 0.000000] Kernel command line: root=/dev/hda6 ro
[ 0.000000] NR_IRQS:512
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] irq: irq 55 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 55
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] GMT Delta read from XPRAM: 0 minutes, DST: off
[ 0.000000] time_init: decrementer frequency = 18.432000 MHz
[ 0.000000] time_init: processor frequency = 999.999997 MHz
[ 0.000000] clocksource: timebase mult[d9038e4] shift[22] registered
[ 0.000000] clockevent: decrementer mult[4b7] shift[16] cpu[0]
[ 0.000380] Console: colour dummy device 80x25
[ 0.000608] console handover: boot [udbg0] -> real [tty0]
[ 0.000911] irq: irq 22 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 22
[ 0.000951] irq: irq 23 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 23
[ 0.002148] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.003688] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.175356] High memory: 524288k
[ 0.175367] Memory: 1279620k/1310720k available (4556k kernel code, 29916k reserved, 216k data, 474k bss, 236k init)
[ 0.175391] Kernel virtual memory layout:
[ 0.175403] * 0xfffef000..0xfffff000 : fixmap
[ 0.175416] * 0xff800000..0xffc00000 : highmem PTEs
[ 0.175429] * 0xfde67000..0xff800000 : early ioremap
[ 0.175443] * 0xf1000000..0xfde67000 : vmalloc & ioremap
[ 0.175775] Calibrating delay loop... 36.73 BogoMIPS (lpj=73472)
[ 0.244648] Security Framework initialized
[ 0.244686] SELinux: Disabled at boot.
[ 0.244732] Mount-cache hash table entries: 512
[ 0.245237] device-tree: Duplicate name in /cpus/PowerPC,g...@0, renamed to "l2-cache#1"
[ 0.248487] Initializing cgroup subsys ns
[ 0.248505] Initializing cgroup subsys cpuacct
[ 0.248520] Initializing cgroup subsys devices
[ 0.248534] Initializing cgroup subsys freezer
[ 0.248547] Initializing cgroup subsys net_cls
[ 0.249965] net_namespace: 1076 bytes
[ 0.250571] regulator: core version 0.5
[ 0.250869] NET: Registered protocol family 16
[ 0.252557] irq: irq 42 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 42
[ 0.252656] KeyWest i2c @0xf8001003 irq 42 /un...@f8000000/i...@f8001000
[ 0.252677] channel 0 bus <multibus>
[ 0.252705] channel 1 bus <multibus>
[ 0.252761] irq: irq 26 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 26
[ 0.252788] KeyWest i2c @0x80018000 irq 26 /p...@f2000000/mac...@17/i...@18000
[ 0.252809] channel 0 bus <multibus>
[ 0.252840] PMU i2c /p...@f2000000/mac...@17/via-...@16000/pmu-i2c
[ 0.252859] channel 1 bus <multibus>
[ 0.252874] channel 2 bus <multibus>
[ 0.252979] irq: irq 25 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 25
[ 0.253017] irq: irq 47 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 47
[ 0.253304] PCI: Probing PCI hardware
[ 0.253607] pci 0000:00:10.0: reg 10 32bit mmio: [0x91000000-0x91ffffff]
[ 0.253621] pci 0000:00:10.0: reg 14 32bit mmio: [0xa0000000-0xa7ffffff]
[ 0.253647] pci 0000:00:10.0: reg 30 32bit mmio: [0x90000000-0x9001ffff]
[ 0.253746] irq: irq 48 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 48
[ 0.254307] pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff]
[ 0.254357] pci 0001:10:12.0: supports D1 D2
[ 0.254366] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254393] pci 0001:10:12.0: PME# disabled
[ 0.254440] pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
[ 0.254503] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.254569] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.254638] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff]
[ 0.254713] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff]
[ 0.254762] pci 0001:10:1b.0: supports D1 D2
[ 0.254770] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254790] pci 0001:10:1b.0: PME# disabled
[ 0.254844] pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff]
[ 0.254893] pci 0001:10:1b.1: supports D1 D2
[ 0.254901] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.254921] pci 0001:10:1b.1: PME# disabled
[ 0.254975] pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff]
[ 0.255024] pci 0001:10:1b.2: supports D1 D2
[ 0.255031] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.255052] pci 0001:10:1b.2: PME# disabled
[ 0.255129] irq: irq 52 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 52
[ 0.255170] irq: irq 27 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 27
[ 0.255206] irq: irq 28 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 28
[ 0.255242] irq: irq 29 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 29
[ 0.255275] irq: irq 63 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 63
[ 0.256688] pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff]
[ 0.256752] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff]
[ 0.256795] pci 0002:20:0e.0: supports D1 D2
[ 0.256802] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.256829] pci 0002:20:0e.0: PME# disabled
[ 0.256868] pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff]
[ 0.256896] pci 0002:20:0f.0: reg 30 32bit mmio: [0xf5100000-0xf51fffff]
[ 0.256972] irq: irq 39 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 39
[ 0.257006] irq: irq 40 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 40
[ 0.257041] irq: irq 41 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 41
[ 0.257694] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff]
[ 0.257706] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff]
[ 0.257716] pci_bus 0000:00: resource 2 mem: [0x90000000-0xafffffff]
[ 0.257726] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff]
[ 0.257735] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff]
[ 0.257745] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff]
[ 0.257756] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff]
[ 0.257766] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff]
[ 0.264311] bio: create slab <bio-0> at 0
[ 0.265403] usbcore: registered new interface driver usbfs
[ 0.265627] usbcore: registered new interface driver hub
[ 0.265786] usbcore: registered new device driver usb
[ 0.268015] NET: Registered protocol family 2
[ 0.268283] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.268706] Switched to high resolution mode on CPU 0
[ 0.269472] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.271747] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.272348] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.272377] TCP reno registered
[ 0.272826] NET: Registered protocol family 1
[ 0.273062] Trying to unpack rootfs image as initramfs...
[ 0.960656] Freeing initrd memory: 9092k freed
[ 0.962324] Thermal assist unit not available
[ 0.962901] setup_kcore: restrict size=3fffffff
[ 0.963225] Registering PowerMac CPU frequency driver
[ 0.963256] Low: 765 Mhz, High: 998 Mhz, Boot: 765 Mhz
[ 0.985351] audit: initializing netlink socket (disabled)
[ 0.985408] type=2000 audit(1256477938.984:1): initialized
[ 0.985839] highmem bounce pool size: 64 pages
[ 0.985975] VFS: Disk quotas dquot_6.5.2
[ 0.986052] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.986140] msgmni has been set to 1495
[ 0.986483] alg: No test for stdrng (krng)
[ 0.986637] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.986661] io scheduler noop registered
[ 0.986673] io scheduler anticipatory registered
[ 0.986685] io scheduler deadline registered
[ 0.986710] io scheduler cfq registered (default)
[ 0.987411] nvidiafb: Device ID: 10de0329
[ 1.000669] nvidiafb: CRTC0 analog not found
[ 1.016664] nvidiafb: CRTC1 analog not found
[ 1.116468] i2c-adapter i2c-0: unable to read EDID block.
[ 1.268462] i2c-adapter i2c-0: unable to read EDID block.
[ 1.420461] i2c-adapter i2c-0: unable to read EDID block.
[ 1.472685] nvidiafb: Found OF EDID for head 1
[ 1.472695] nvidiafb: EDID found from BUS1
[ 1.572462] i2c-adapter i2c-1: unable to read EDID block.
[ 1.724461] i2c-adapter i2c-1: unable to read EDID block.
[ 1.876463] i2c-adapter i2c-1: unable to read EDID block.
[ 1.928685] nvidiafb: CRTC 1 is currently programmed for DFP
[ 1.928701] nvidiafb: Using DFP on CRTC 1
[ 1.928714] nvidiafb: Panel size is 1024 x 768
[ 1.928727] nvidiafb: Panel is TMDS
[ 1.929651] nvidia: Backlight initialized (nvidiabl0)
[ 1.930176] nvidiafb: Flat panel dithering disabled
[ 1.932693] Console: switching to colour frame buffer device 128x48
[ 1.935335] nvidiafb: PCI nVidia NV32 framebuffer (32MB @ 0xA0000000)
[ 1.942436] Generic non-volatile memory driver v1.1
[ 1.942602] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.943382] pmac_zilog: 0.6 (Benjamin Herrenschmidt <[email protected]>)
[ 1.943455] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
[ 1.943621] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
[ 1.943845] Serial: MPC52xx PSC UART driver
[ 1.947262] brd: module loaded
[ 1.947386] MacIO PCI driver attached to Intrepid chipset
[ 1.948085] irq: irq 32 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 32
[ 1.948547] irq: irq 24 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 24
[ 1.948566] irq: irq 12 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 16
[ 1.948822] irq: irq 5 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 17
[ 1.948840] irq: irq 6 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 18
[ 1.949022] irq: irq 7 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 19
[ 1.949040] irq: irq 8 on host /p...@f2000000/mac...@17/interrupt-control...@40000 mapped to virtual irq 20
[ 1.949595] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.950240] Uniform Multi-Platform E-IDE driver
[ 1.950475] adb: starting probe task...
[ 1.951547] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
[ 2.204148] adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
[ 2.210841] ADB keyboard at 2, handler 1
[ 2.210894] Detected ADB keyboard, type ISO, swapping keys.
[ 2.211188] input: ADB keyboard as /devices/virtual/input/input1
[ 2.211401] input: ADB Powerbook buttons as /devices/virtual/input/input2
[ 2.227880] ADB mouse at 3, handler set to 4 (trackpad)
[ 2.288944] input: ADB mouse as /devices/virtual/input/input3
[ 2.290132] adb: finished probe task...
[ 2.968670] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
[ 2.969861] Probing IDE interface ide0...
[ 3.256853] hda: TOSHIBA MK4025GAS, ATA DISK drive
[ 3.928806] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.928864] hda: UDMA/100 mode selected
[ 3.930121] ide0 at 0xf100a000-0xf100a070,0xf100a160 on irq 39
[ 4.948670] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24
[ 4.949936] Probing IDE interface ide1...
[ 5.348854] hdc: MATSHITACD-RW CW-8122, ATAPI CD/DVD-ROM drive
[ 5.684790] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.684965] hdc: MWDMA2 mode selected
[ 5.686395] ide1 at 0xf100e000-0xf100e070,0xf100e160 on irq 24
[ 5.687899] ide-gd driver 1.18
[ 5.689241] hda: max request size: 512KiB
[ 5.748782] hda: 78140160 sectors (40007 MB), CHS=16383/255/63
[ 5.750192] hda: cache flushes supported
[ 5.751606] hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8
[ 5.768695] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.770268] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 5.771661] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 5.773043] ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002)
[ 5.774411] ohci_hcd 0001:10:1a.0: OHCI Host Controller
[ 5.776027] ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
[ 5.777508] ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
[ 5.852259] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.853665] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.855044] usb usb1: Product: OHCI Host Controller
[ 5.856413] usb usb1: Manufacturer: Linux 2.6.30-2-powerpc ohci_hcd
[ 5.857784] usb usb1: SerialNumber: 0001:10:1a.0
[ 5.859333] usb usb1: configuration #1 chosen from 1 choice
[ 5.860833] hub 1-0:1.0: USB hub found
[ 5.862203] hub 1-0:1.0: 2 ports detected
[ 5.863997] ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002)
[ 5.865378] ohci_hcd 0001:10:1b.0: OHCI Host Controller
[ 5.866945] ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2
[ 5.868332] ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
[ 5.944235] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.945585] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.946925] usb usb2: Product: OHCI Host Controller
[ 5.948245] usb usb2: Manufacturer: Linux 2.6.30-2-powerpc ohci_hcd
[ 5.949564] usb usb2: SerialNumber: 0001:10:1b.0
[ 5.951032] usb usb2: configuration #1 chosen from 1 choice
[ 5.952465] hub 2-0:1.0: USB hub found
[ 5.953804] hub 2-0:1.0: 3 ports detected
[ 5.955456] ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002)
[ 5.956797] ohci_hcd 0001:10:1b.1: OHCI Host Controller
[ 5.958299] ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3
[ 5.959619] ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
[ 6.036228] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.037524] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.038796] usb usb3: Product: OHCI Host Controller
[ 6.040042] usb usb3: Manufacturer: Linux 2.6.30-2-powerpc ohci_hcd
[ 6.041273] usb usb3: SerialNumber: 0001:10:1b.1
[ 6.042647] usb usb3: configuration #1 chosen from 1 choice
[ 6.043979] hub 3-0:1.0: USB hub found
[ 6.045217] hub 3-0:1.0: 2 ports detected
[ 6.047169] mice: PS/2 mouse device common for all mice
[ 6.048539] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 6.050652] TCP cubic registered
[ 6.051952] NET: Registered protocol family 10
[ 6.054105] lo: Disabled Privacy Extensions
[ 6.055998] Mobile IPv6
[ 6.057241] NET: Registered protocol family 17
[ 6.058909] registered taskstats version 1
[ 6.060555] input: PMU as /devices/virtual/input/input4
[ 6.061960] Registered led device: pmu-front-led
[ 6.063405] rtc-generic rtc-generic: setting system clock to 2009-10-25 13:39:04 UTC (1256477944)
[ 6.064729] Freeing unused kernel memory: 236k init
[ 6.188759] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 6.320738] usb 1-1: device descriptor read/64, error -62
[ 6.359010] PowerMac i2c bus pmu 2 registered
[ 6.360559] PowerMac i2c bus pmu 1 registered
[ 6.362075] PowerMac i2c bus mac-io 0 registered
[ 6.363595] PowerMac i2c bus uni-n 1 registered
[ 6.365188] PowerMac i2c bus uni-n 0 registered
[ 6.449332] Linux agpgart interface v0.103
[ 6.456744] agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset
[ 6.458296] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8
[ 6.459774] agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0
[ 6.561543] usb 1-1: device descriptor read/64, error -62
[ 6.596890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.598323] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 6.599781] ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006)
[ 6.601232] ehci_hcd 0001:10:1b.2: EHCI Host Controller
[ 6.602821] ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 4
[ 6.650383] sungem.c:v0.98 8/24/03 David S. Miller ([email protected])
[ 6.683949] ide-cd driver 5.00
[ 6.796761] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 6.800802] ide-cd: hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 6.802359] Uniform CD-ROM driver Revision: 3.20
[ 6.845195] ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
[ 6.936740] usb 1-1: device descriptor read/64, error -62
[ 6.938805] PHY ID: 4061e4, addr: 0
[ 6.940804] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:da:be:1a
[ 6.942278] eth0: Found BCM5221 PHY
[ 6.943919] firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002)
[ 6.948842] ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[ 6.950451] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.951930] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.953417] usb usb4: Product: EHCI Host Controller
[ 6.954863] usb usb4: Manufacturer: Linux 2.6.30-2-powerpc ehci_hcd
[ 6.956308] usb usb4: SerialNumber: 0001:10:1b.2
[ 6.957981] usb usb4: configuration #1 chosen from 1 choice
[ 6.959529] hub 4-0:1.0: USB hub found
[ 6.961025] hub 4-0:1.0: 5 ports detected
[ 6.962869] b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006)
[ 6.967828] ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0
[ 7.016810] firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10
[ 7.172694] usb 1-1: device descriptor read/64, error -62
[ 7.367646] device-mapper: uevent: version 1.0.3
[ 7.370189] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
[ 7.404748] usb 1-1: new full speed USB device using ohci_hcd and address 4
[ 7.416512] PM: Starting manual resume from disk
[ 7.516875] firewire_core: created device fw0: GUID 000a95fffedabe1a, S400
[ 7.542414] kjournald starting. Commit interval 5 seconds
[ 7.544051] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.812686] usb 1-1: device not accepting address 4, error -62
[ 7.940687] usb 1-1: new full speed USB device using ohci_hcd and address 5
[ 8.348674] usb 1-1: device not accepting address 5, error -62
[ 8.350360] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 10.217541] udev: starting version 146
[ 11.204600] cfg80211: Using static regulatory domain info
[ 11.206319] cfg80211: Regulatory domain: US
[ 11.207950] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.209611] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 11.211258] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 11.212887] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 11.214486] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 11.216066] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 11.217641] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 11.219224] cfg80211: Calling CRDA for country: US
[ 12.583476] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 13.001879] phy0: Selected rate control algorithm 'minstrel'
[ 13.003292] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[ 14.502789] Adding 1372060k swap on /dev/hda7. Priority:-1 extents:1 across:1372060k
[ 14.728282] EXT3 FS on hda6, internal journal
[ 15.066484] loop: module loaded
[ 15.204200] SCSI subsystem initialized
[ 15.311986] adt746x: version 1 (supported)
[ 15.313628] adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
[ 15.315192] sensor 0: HDD BOTTOMSIDE
[ 15.316745] sensor 1: CPU TOPSIDE
[ 15.318272] sensor 2: GPU ON DIE
[ 15.339521] adt746x: ADT7460 initializing
[ 15.343645] adt746x: Lowering max temperatures from 73, 80, 109 to 70, 50, 70
[ 16.804660] kjournald starting. Commit interval 5 seconds
[ 16.806408] EXT3 FS on hda8, internal journal
[ 16.807960] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.444289] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 30.509295] lp: driver loaded but no devices found
[ 36.568803] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.603292] input: b43-phy0 as /devices/virtual/input/input5
[ 36.636753] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 36.724129] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 36.758874] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 36.805490] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 36.948691] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 37.009666] Registered led device: b43-phy0::tx
[ 37.009706] Registered led device: b43-phy0::rx
[ 37.009750] Registered led device: b43-phy0::radio
[ 37.024729] b43-phy0: Radio turned on by software
[ 37.025631] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 37.734131] Process Xorg (pid:1782) mapped non-existing PCI legacy memory for 00000:00
[ 920.305324] wlan0: authenticate with AP 00:0c:f6:1b:89:aa
[ 920.307828] wlan0: authenticated
[ 920.307841] wlan0: associate with AP 00:0c:f6:1b:89:aa
[ 920.310158] wlan0: RX AssocResp from 00:0c:f6:1b:89:aa (capab=0x431 status=0 aid=3)
[ 920.310169] wlan0: associated
[ 920.311696] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 930.872698] wlan0: no IPv6 routers present
[ 6941.864698] wlan0: no probe response from AP 00:0c:f6:1b:89:aa - disassociating
[ 6948.520378] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 1
[ 6948.716689] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 2
[ 6948.916696] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 3
[ 6949.116691] wlan0: direct probe to AP 00:0c:f6:1b:89:aa timed out
[ 6954.296587] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 1
[ 6954.492704] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 2
[ 6954.497447] wlan0 direct probe responded
[ 6954.497457] wlan0: authenticate with AP 00:0c:f6:1b:89:aa
[ 6954.696682] wlan0: authenticate with AP 00:0c:f6:1b:89:aa
[ 6954.896695] wlan0: authenticate with AP 00:0c:f6:1b:89:aa
[ 6955.096697] wlan0: authentication with AP 00:0c:f6:1b:89:aa timed out
[ 6968.708546] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 1
[ 6968.904706] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 2
[ 6969.104705] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 3
[ 6969.304695] wlan0: direct probe to AP 00:0c:f6:1b:89:aa timed out
[ 6980.260582] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 1
[ 6980.456704] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 2
[ 6980.656707] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 3
[ 6980.856706] wlan0: direct probe to AP 00:0c:f6:1b:89:aa timed out
[ 6986.036515] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 1
[ 6986.232704] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 2
[ 6986.432713] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 3
[ 6986.632705] wlan0: direct probe to AP 00:0c:f6:1b:89:aa timed out
[ 6991.812551] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 1
[ 6992.008692] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 2
[ 6992.208704] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 3
[ 6992.408704] wlan0: direct probe to AP 00:0c:f6:1b:89:aa timed out
[ 7071.888584] wlan0: authenticate with AP 00:0c:f6:1b:89:aa
[ 7072.084686] wlan0: authenticate with AP 00:0c:f6:1b:89:aa
[ 7072.284692] wlan0: authenticate with AP 00:0c:f6:1b:89:aa
[ 7072.484693] wlan0: authentication with AP 00:0c:f6:1b:89:aa timed out
[ 7107.611760] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 1
[ 7107.808714] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 2
[ 7108.008705] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 3
[ 7108.208710] wlan0: direct probe to AP 00:0c:f6:1b:89:aa timed out
[ 7137.572831] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 1
[ 7137.772706] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 2
[ 7137.972701] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 3
[ 7138.172705] wlan0: direct probe to AP 00:0c:f6:1b:89:aa timed out
[ 7154.900728] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 1
[ 7155.100702] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 2
[ 7155.300690] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 3
[ 7155.500700] wlan0: direct probe to AP 00:0c:f6:1b:89:aa timed out
[ 7160.676561] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 1
[ 7160.872706] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 2
[ 7161.072701] wlan0: direct probe to AP 00:0c:f6:1b:89:aa try 3
[ 7161.272694] wlan0: direct probe to AP 00:0c:f6:1b:89:aa timed out
[ 7166.452562] wlan0: authenticate with AP 00:0c:f6:1b:89:aa
[ 7166.648706] wlan0: authenticate with AP 00:0c:f6:1b:89:aa
[ 7166.848702] wlan0: authenticate with AP 00:0c:f6:1b:89:aa
[ 7167.048710] wlan0: authentication with AP 00:0c:f6:1b:89:aa timed out
_______________________________________________
Bcm43xx-dev mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
