On 03/23/2010 03:58 PM, Calvin Walton wrote:
>
> I will warn you that the following is rather untested, as I don't have
> any of the affected hardware (or any b43 devices at all, actually), but
> something along these lines should work. There's no syntax errors, at
> least :)
>
> --- /lib/udev/rules.d/65-persistent-b43-mac-generator.rules
>
> ACTION!="add" GOTO="persistent_b43_mac_generator_end"
>
> SUBSYSTEM=="net", DRIVERS=="b43", ATTR{address}=="ff:ff:ff:ff:ff:ff",
> IMPORT{program}="write_persistent_b43_mac"
>
> SUBSYSTEM=="net", ENV{MACADDRESS_NEW}=="?*", RUN+="ifconfig $env{INTERFACE}
> hw ether $env{MACADDRESS_NEW}"
>
> LABEL="persistent_b43_mac_generator_end"
>
> --- /lib/udev/write_persistent_b43_mac (chmod +x)
>
> #!/bin/bash
>
> # This mac address generation function could be replaced with something better
> MACADDRESS=$(dd if=/dev/urandom bs=1 count=6 2>/dev/null | od -tx1 | head -1
> | cut -d' ' -f2- | awk '{ print $1":"$2":"$3":"$4":"$5":"$6 }')
>
> RULES_FILE='/etc/udev/rules.d/60-persistent-b43-mac.rules'
>
> . /lib64/udev/rule_generator.functions
>
> lock_rules_file
>
> choose_rules_file
>
> echo "DEVPATH==\"$DEVPATH\", DRIVERS==\"b43\",
> ATTR{address}==\"ff:ff:ff:ff:ff:ff\", RUN+=\"ifconfig $INTERFACE hw ether
> $MACADDRESS\"" >> $RULES_FILE
>
> echo "MACADDRESS_NEW=$MACADDRESS"
>
> unlock_rules_file
>
> ---
>
> A new file "/etc/udev/rules.d/60-persistent-b43-mac.rules" will be
> created, which will contain the the saved mac address and bypass the
> generating script on future boots.
>
> This should probably be run by the udev maintainers, but is a start,
> anyways.
Thanks for the really good start.
The above routines have a minor problem in that using a random value for the
first byte of the MAC address runs the risk of having the multicast bit set. By
fixing the first one to a multiple of 4, that problem is avoided.
A second minor problem is that the full path must be given for all standard
utilities, otherwise they are assumed to be in /lib/udev. Thus all references to
"ifconfig" were replaced by "/sbin/ifconfig". I hope all distros put ifconfig in
/sbin.
I have modified ssb to supply a MAC address of 80:80:80:80:80:80, rather than
FF:FF:FF:FF:FF:FF. This way the interface can come up even though the new udev
routines are not available. When b43 detects that address, it will log a message
describing why the udev routines are needed, and how to obtain them.
The one remaining problem is that the interface has already been renamed before
60-persistent-b43-mac.rules is processed. In my case, the interface is wlan13,
not wlan0. After I manually modified 60-..., then the new address is applied.
I'm still working on this problem.
Thanks again for the help.
Larry
_______________________________________________
Bcm43xx-dev mailing list
Bcm43xx-dev@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
