Lavlu,

These seem alright.  And you have informed me on a private mail that
you do not have a firewall either.

Can you check the serial port speed pppd is using?  Check your
/etc/ppp/options file.  Set the speed to a moderate value like 38400,
19200 or 9600.

On 1/26/06, S. M. Ibrahim (Lavlu) <[EMAIL PROTECTED]> wrote:
>     [EMAIL PROTECTED]:~$ su
>       Password:
>       tanha:/home/ibrahim#  ifconfig
>       lo        Link encap:Local Loopback
>                 inet addr:127.0.0.1  Mask:255.0.0.0
>                 UP LOOPBACK RUNNING  MTU:16436   Metric:1
>                 RX packets:118 errors:0 dropped:0  overruns:0 frame:0
>                 TX packets:118 errors:0 dropped:0  overruns:0 carrier:0
>                 collisions:0 txqueuelen:0
>                 RX bytes:7580 (7.4 KiB)  TX bytes:7580 (7.4 KiB)
>
>       tanha:/home/ibrahim#  pon
>       tanha:/home/ibrahim#  ifconfig
>       lo        Link encap:Local Loopback
>                 inet addr:127.0.0.1  Mask:255.0.0.0
>                 UP LOOPBACK RUNNING  MTU:16436   Metric:1
>                 RX packets:120 errors:0 dropped:0  overruns:0 frame:0
>                 TX packets:120 errors:0 dropped:0  overruns:0 carrier:0
>                 collisions:0 txqueuelen:0
>                 RX bytes:7680 (7.5 KiB)  TX bytes:7680 (7.5 KiB)
>
>       ppp0      Link encap:Point-to-Point Protocol
>                 inet addr:10.87.6.176  P-t-P:192.168.254.254  
> Mask:255.255.255.255
>                 UP POINTOPOINT RUNNING NOARP  MULTICAST  MTU:1500  Metric:1
>                 RX packets:5 errors:0 dropped:0  overruns:0 frame:0
>                 TX packets:10 errors:0 dropped:0  overruns:0 carrier:0
>                 collisions:0 txqueuelen:3
>                 RX bytes:190 (190.0 b)  TX bytes:283 (283.0 b)
>
>       tanha:/home/ibrahim#  netstat -nr
>       Kernel IP routing  table
>       Destination     Gateway         Genmask         Flags    MSS Window  
> irtt Iface
>       192.168.254.254  0.0.0.0         255.255.255.255 UH        0 0          
> 0 ppp0
>       0.0.0.0         192.168.254.254 0.0.0.0         UG        0 0          
> 0 ppp0
>       tanha:/home/ibrahim#  cat /etc/resolv.conf
>       # resolv.conf  created by pppconfig for provider
>
>       nameserver  192.168.80.66
>
>       nameserver  202.134.13.3
>       tanha:/home/ibrahim#
>
>
>
> Mojahedul Hoque Abul Hasanat <[EMAIL PROTECTED]> wrote:          After you 
> dial in, issue these commands and give us the outputs:
>
>   1) ifconfig
>
>   2) netstat -nr
>
>   3) cat /etc/resolv.conf
>
>
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
>  With a free 1 GB, there's more in store with Yahoo! Mail.
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe send a blank mail to:
>         [EMAIL PROTECTED]
> Yahoo! Groups Links
>
>
>
>
>
>
>


--
Mojahed


To unsubscribe send a blank mail to:
        [EMAIL PROTECTED] 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/bdlug/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to