On 5/20/07, Abu Zaher <[EMAIL PROTECTED]> wrote: > > > The precedure is fairly the same. Doesn't wvdialconf detect your modem? >
No, i don`t think.... the message is: Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S2 S3 WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyUSB0<*1>: ATQ0 V1 E1 -- �� ttyUSB0<*1>: and failed too at 115200, giving up. And > when you plug in your modem, what does `tail -f /var/log/syslog` say? > Some sort of like this... May 20 04:50:57 localhost kernel: usbcore: registered new driver usbserial_generic May 20 04:50:57 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core May 20 04:50:57 localhost kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 May 20 04:50:57 localhost kernel: pl2303 1-2:1.0: pl2303 converter detected May 20 04:50:57 localhost kernel: usb 1-2: pl2303 converter now attached to ttyUSB0 May 20 04:50:57 localhost kernel: usbcore: registered new driver pl2303 May 20 04:50:57 localhost kernel: drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver May 20 04:50:57 localhost NetworkManager: <debug info>^I[1179615057.883075] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_67b_2303_noserial_if0'). May 20 04:50:57 localhost NetworkManager: <debug info>^I[1179615057.934858] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_67b_2303_noserial_if0_serial_usb_0'). May 20 04:50:57 localhost NetworkManager: <debug info>^I[1179615057.988281] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_67b_2303_noserial_usbraw'). Zico [Non-text portions of this message have been removed]
