Modbus is not supported on the BeagleBone Black. It requires that the Ethernet be connected to one of the PRU/ICSS devices which cannot be supported.
Gerald On Wed, Sep 25, 2013 at 11:09 AM, Riccardo Fracassi < [email protected]> wrote: > Hi to everybody. > I have found in internet the publication of the software for the protocol > modbus. > > https://github.com/**TooTallNate/node-modbus-stack<https://github.com/TooTallNate/node-modbus-stack> > . > ** > > I have the necessity to use the program installing him/it on a system > BEAGLEBONE BLACK ARM 3359 Rev. A5C OS. Angstrom. > I have to plan the system the Slavic formalities with protocol Modbus > TCP/IP to transfer the data acquired by the Beaglebone to a system HMI and > to visualize them. > > - Beaglebone Slave ip 192.168.7.2 door 502 > - HMI Master ip 192.168.7.3 door 502 > - Connection Ethernet I register Modbus TCP/IP. > > For my adversity I don't know the language javascript with which is > presumably developed. > I have tried to correct the found errors and currently others are > visualized not from there. > Unfortunately the system doesn't work! > Is someone able to lend me a hand? > In advance I thank any of good heart. > For me it is different time that I look for a solution, I am now to I > exhaust him. > Hi > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
