Hi, Louis
Wow, thanks for heeding my call.
1) Yes, I am using the latest Starterware for the AM335x family. The
older version actually worked better because I could compile in debug mode
while the latest version only lets me run in release mode for the time
being. As my TI Applications support adviser noted before turning me over
to the forum, the latest version inserts a debug or release folder in the
source code location file chain.
2) Yes, I tested it first without any of my own code added to the
demo. The print statements were only added later to see where it stopped.
3) I have no problem running the Angstrom Distribution or the Demo using
a freshly formatted memory card. Although I am not sure what to expect
when I run usb_dev_serial. Perhaps a second com port window? Surprisingly
(to me), after Starterware hangs at MMUinit, the MLO/Demo binaries still
work after I press the reset button on the board (but not the reset in
Starterware).
Thanks for giving me hope,
Warren
On Thu, Sep 26, 2013 at 1:58 PM, Louis McCarthy <[email protected]> wrote:
> This is a pretty specific issue, and since I don't have this exact setup,
> I am shooting in the dark.
>
> 1) Are you using the latest Starterware for the AM335x family?
> 2) Have you tested it without any of your code added to the demo?
> 3) Have you freshly formatted and partitioned the memory card and then
> copied MLO first, then other files?
>
> It's been a few months since I played around in Starterware....
> Louis
>
> On Wednesday, September 18, 2013 12:49:33 PM UTC-5, Warren S wrote:
>>
>> Hi:
>>
>> My BeagleBone White hangs at the function call MMUInit((unsigned
>> int*)pageTable) while running the Demo and the usb_dev_serial examples in
>> TI's Starterware 01.01 in the TI Code Composer Studio v5. I have
>> corresponded with the TI Applications support team and the TI Starterware
>> community at TI Home <http://www.ti.com/> » TI E2E
>> Community<http://e2e.ti.com/>» Support
>> Forums <http://e2e.ti.com/support/default.aspx> » Embedded
>> Software<http://e2e.ti.com/support/embedded/default.aspx>»
>> StarterWare <http://e2e.ti.com/support/embedded/starterware/default.aspx>»
>> StarterWare
>> forum <http://e2e.ti.com/support/embedded/starterware/f/790.aspx> » the
>> demo in StarterWare_02_00_00_07 is not working for
>> AM3352BZCZ80<http://e2e.ti.com/support/embedded/starterware/f/790/t/287998.aspx>to
>> no avail. It runs the C instructions and my added print to console
>> statements just fine until I get to this function call halfway through the
>> MMUConfigAndEnable function call define earlier in the example programs.
>>
>> Thanks,
>>
>> Warren S.
>>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to a topic in the
> Google Groups "BeagleBoard" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/beagleboard/xVEoeppurpI/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> [email protected].
> For more options, visit https://groups.google.com/groups/opt_out.
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
