Hum, so where is the C file for BBB init? Could you confirm me that user led0 pin number is 1*32+21 so 53?
thanks for your answer Best! Le samedi 28 septembre 2013 10:55:56 UTC-4, RobertCNelson a écrit : > > On Sat, Sep 28, 2013 at 2:10 AM, <[email protected] <javascript:>> > wrote: > > According to BBB user manual p61 and BBB schematic: > > led user0 is connected on PIN GPIO1_21, so his pin number should be > > 1*32+21=53. > > > > But in arch/arm/mach-omap2/board-omap3beagle.c his number is 150, and > led > > user1 pin number is 149; > > BeagleBone Black != "omap3 BeagleBoard" > > gpio1_21 is right here: > > > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/am335x-bone-common.dtsi#n169 > > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
