Thank you Louis, I figured it out that I could start looking a some existing driver but then I found about the 3.8 kernel changes regarding the 3.2 kernel and got a little confuse.
I would like to learn more about Linux drivers for embedded devices, is there a good place to start looking at? Xavier On Thursday, September 26, 2013 3:10:33 PM UTC-5, Louis McCarthy wrote: > > I would start by looking at the dts file, for an existing LCD cape, in > /lib/firmware > > You can modify it, compile it to a dtbo file, and then load it as a test > cape for testing. This is assuming you are using the 3.8 Kernel. > > You should check out the hipstercircuits blog for good info on displays > and capes. > > Louis > > On Monday, September 2, 2013 7:53:13 PM UTC-5, xavier....@gmail.com wrote: >> >> Hi everyone, I'm trying to connect a 3.5" LCD to a BBW, I'm basing my >> connections from the LCD3 cape, however the LCD parameters are different >> (HFP, etc) which I know the right values. >> I would like to know which files do I have to modify (or add) with the >> LCD information and how do I configure that the BBW boots using the LCD. >> >> I have a little experience with linux and BB in general. >> >> Thank you for your help. >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
