> and a lot of the pins are shared with the LCD/HDMI interface. Which can be made available by disabling the hdmi framer by adding the following to uEnv.txt on the fat32 partition: capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN
On Wed, Oct 2, 2013 at 1:03 PM, Charles Steinkuehler < char...@steinkuehler.net> wrote: > On 9/30/2013 8:40 AM, dthphon...@gmail.com wrote: > > Is it possible to use these two PRU (pru0 and pru1) simultaneously to > > control fast GPIO in direct PRU - output mode? If yes, how can we do that > > with only r30? > > Each PRU has it's own r30, which drives the direct outputs (assuming you > have the pinmux setup properly). You can only drive a limited number of > the BeagleBone header pins using PRU direct I/O, and a lot of the pins > are shared with the LCD/HDMI interface. > > -- > Charles Steinkuehler > char...@steinkuehler.net > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
