A little strange but I'm in business - pulled the board out and re-installed it in the BBB enclosure, now the slot works and I have updated correctly. Thanks for listening :-)
On Tuesday, October 1, 2013 7:09:35 PM UTC-5, Mark wrote: > > I cannot get a micro SD chip to show up when I plug it in the BBB slot - I > have tried several sizes and vendors. > This is a brand new BeagleBone, it boots OK (I'm posting this from it) as > long as I don't plug in a SD chip. > I've burned several software images to several chips, plugged them in, and > powered up (wall wart) while holding the BOOT button. Only the power light > comes on. > If I attempt to power the board with any chip plugged in, the first 3 user > lights come on and the board hangs. > Plugging the chip in afterwards does not affect anything, but the device > does not show up either. > Any ideas? > > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
