this blog have a lot of helpful DT stuff http://hipstercircuits.com/
On Sun, Oct 6, 2013 at 3:48 PM, Amalinda J' Gamage < [email protected]> wrote: > thank you David Lambert , > G > aryamort and > Brandon , appreciate your time spent! > > I'm planing to buy the book recomended. I think it might stop me from > wandering around with my problems:-) > > and that means using previous Kernel in the beaglebone its possible that > we connect an LED in series with a resister and lightn it up using jurst > terminal! *but *where as when we install the new kernel (3.8), its going > to involve the device tree overlaying since the "board file" is not there > anymore and the new kernel needs an Overlay defining its GPIO and > all peripherals thus as soon as the new kernel is installed using the > terminal I will not be able to play around with GPIO or any pheripheral for > that matter. > > okay. phew! that was hard to learn! did a lot of reading today! but was > worth it. Thank you everyone for helping! > > > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
