same problem here :( El martes, 13 de agosto de 2013 06:27:35 UTC-5, Max Dobres escribió: > > Adafruit have a tutorial at: > > http://learn.adafruit.com/setting-up-io-python-library-on-beaglebone-black/installation > > This installs python as part of the adafruit Python GPIO install. > It all seems to work for Python > but something goes wrong, because when I try and start IDLE I get: > > ** IDLE can't import Tkinter. Your Python may not be configured for Tk. ** > > Python 2.7 seems OK > > Any further help on this would be appreciated, > Max > > > On Monday, 5 August 2013 21:31:09 UTC+1, jacob powers wrote: >> >> Has anyone had any luck install wxPython on the Beaglebone Black? I have >> tried and gotten as far as getting wxGTK installed as per this tutorial "How >> to Install >> wxPython.<http://wiki.wxpython.org/How%20to%20install%20wxPython>" >> I have been having a problem with the portion: >> python setup.py build >> >> It attempts to build but I am getting this error. >> building '_core_' extension >> arm-angstrom-linux-gnueabi-gcc -march=armv7-a -mthumb-interwork >> -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8 -D__SOFTFP__ >> -fno-strict-aliasing -O2 -pipe -g -feliminate-unused-debug-types -DNDEBUG >> -g -O3 -Wall -Wstrict-prototypes -fPIC -DSWIG_TYPE_TABLE=_wxPython_table >> -DSWIG_PYTHON_OUTPUT_TUPLE -DWXP_USE_THREAD=1 -UNDEBUG -Iinclude -Isrc >> -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 >> -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 >> -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 >> -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/python2.7 >> -c src/helpers.cpp -o >> build-gtk2.unicode/temp.linux-armv7l-2.7/src/helpers.o -O3 -pthread >> cc1plus: warning: command line option '-Wstrict-prototypes' is valid for >> C/ObjC but not for C++ [enabled by default] >> In file included from src/helpers.cpp:16:0: >> include/wx/wxPython/wxPython_int.h:19:19: fatal error: wx/wx.h: No such >> file or directory >> compilation terminated. >> error: command 'arm-angstrom-linux-gnueabi-gcc' failed with exit status 1 >> >> Has anyone had any success install wxPython or has anyone run into a >> situation like this. Thanks. >> >> >> >>
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
