Then I suggest you request an RMA and let the factory folks do it for you. Gerald
On Mon, Oct 7, 2013 at 9:53 PM, Michael Vittiglio < [email protected]> wrote: > Based on the instructions provided I've done everything to the letter. > Unfortunately, this is all I see via the FTDI output via the terminal > command "screen /dev/tty.usb... 115200": > U-Boot SPL 2013.04-dirty (Jun 19 2013 - 09:57:14) > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, > SoftConn) > > On Friday, October 4, 2013 9:24:43 AM UTC-4, Gerald wrote: > >> That indicates there is nothing in flash and nothing on the SD card that >> it can boot from. >> >> Gerald >> >> >> >> On Fri, Oct 4, 2013 at 7:16 AM, Charles Steinkuehler < >> [email protected]> wrote: >> >>> On 10/4/2013 6:46 AM, Michael Vittiglio wrote: >>> > When trying to view what's happening via the FTDI the unity basically >>> puts >>> > out no output with the exception of the occasional "C". Is there any >>> chance >>> > that this can be repaired? As stated earlier in this thread, the "boot >>> > button" option does not seem to work. >>> >>> The boot button completely bypasses the on-board eMMC, so if your 'bone >>> is not booting correctly from SD card when holding the boot button >>> during reset, you need to re-image the SD card. >>> >>> -- >>> Charles Steinkuehler >>> [email protected] >>> >>> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
