So I think you are referring to the possibility of power being supplied to the SYS_5V rail through P6-19. So basically, the test procedure would be: (1) Plug in 5V power cable. (2) Plug in HDMI cable (3) Wait for everything to boot up (4) If it BB fails to boot, see if RT1 tripped due to a possible difference in competing 5V supply rails. (5) If BB boots all the way, remove 5V power cable. (6) If board is still running OR if RT1 trips at that point, then I know monitor is trying to power board. Otherwise, I'm good to just leave it connected from that point forward. Is that a fair test?
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
