On Thu, Oct 10, 2013 at 5:45 AM, <runwal.saur...@gmail.com> wrote: > > I am trying to run Ununtu using Beagleboard XM. I get the following message > when I run the setup_sdcard script: > > I see... > fdisk -l: > Disk /dev/sda: 500.1 GB, 500107862016 bytes > Disk /dev/sdc: 3965 MB, 3965190144 bytes > > lsblk: > NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT > sda 8:0 0 465.8G 0 disk > ├─sda1 8:1 0 462G 0 part / > ├─sda2 8:2 0 1K 0 part > └─sda5 8:5 0 3.8G 0 part [SWAP] > sdc 8:32 1 3.7G 0 disk > ├─sdc1 8:33 1 48M 0 part /media/saurabh/boot > └─sdc2 8:34 1 3.7G 0 part /media/saurabh/rootfs > > Are you 100% sure, on selecting [/dev/sdc] (y/n)? y > > Debug: image has armv7 multi arch kernel support: v3.11.1-armv7-x14 > Debug: image has bone device tree kernel support: v3.8.13-bone28 > Debug: image has omap kernel support: v3.7.10-x13 > Note: [--dtb omap3-beagle-xm] now replaces [--uboot beagle_xm] > ----------------------------- > info: [conf_boot_startmb] undefined using default value: 1 > info: [conf_boot_endmb] undefined using default value: 64 > Debug: ARM rootfs: armhf-rootfs-ubuntu-raring.tar > Debug: image has initrd.img: > Debug: image has device tree: > > Downloading Device's Bootloader > ----------------------------- > > After this the download stops and the script exists. I am having my internet > connection active. > Can you please help me with this. Thank you. > > Do I need to add rcn-ee.net as a source or something or may be bypass the > proxy ?
You need internet access to run the "setup_sdcard.sh" script, as the bootloader is pulled separately to allow me to update it later in the field. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.