OK these lines added to beagle.h compiled
MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4 )) /* gpio_133 */\
MUX_VAL(CP(MMC2_DAT4), (IEN | PTD | EN | M4 )) /* gpio_136 */\
MUX_VAL(CP(MMC2_DAT5), (IEN | PTD | EN | M4 )) /* gpio_137 */\
MUX_VAL(CP(MMC2_DAT6), (IEN | PTD | EN | M4 )) /* gpio_138 */\
MUX_VAL(CP(MMC2_DAT7), (IEN | PTD | EN | M4 )) /* gpio_139 */\
MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M2 )) /* gpt_9_pwm_evt
*/\
MUX_VAL(CP(UART2_RTS), (IEN | PTU | EN | M2 )) /*
gpt_10_pwm_evt */\
MUX_VAL(CP(UART2_TX), (IEN | PTU | EN | M2 )) /*
gpt_11_pwm_evt */\
I put them at the bottom of the BBxM section. I will try them in a day or
two and see if it works
>
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
