On Wed, Oct 16, 2013 at 5:46 AM, JianguoWEI <weijianguo1...@gmail.com> wrote: > Hi, All. I am trying to boot Linux mainline kernel 3.3 on BeagleBoard > through NFS. But did not work. > The idea is to work with NFS through the MOSCHIP usb-ethernet driver. As can > be seen from the booting log, it is already built in but for certain reason, > it is not registered and do the IP config. > I guess the problem is from the Linux kernel configuration, maybe I have > forgotten to build in any internet driver or USB support that the MOSCHIP > usb-ethernet driver is based on. > There should be no problem with the uboot, because I am able to boot the > OMAP Linux kernel V3.12 with the same setting, the only difference is that > the Linux mainline kernel 3.3 has not been patched specifically for Beagle > and actually it can boot on BeagleBoard with mmc file system. > Anyone can tell me why?
Why are you bothering with v3.3? Here's my patchset from back then: https://github.com/RobertCNelson/stable-kernel/tree/v3.3.x It boots, but i'm not going to support it.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.