Hi Robert, I too had missed it earlier. I would be glad to do the quick "test-me.sh" script.
George On Thu, Oct 17, 2013 at 2:53 PM, William Hermans <[email protected]> wrote: > Robert, I completely missed this on your first post. > > "Other thoughts... > Some users will build/install these from src, however anyone > interested in a quick "test-me.sh*" script which will install the new > kernel on a daily/weekly basis? > " > > Yes please ! Does one exist yet ? I'll test every new version that comes > out when I am made aware of it if such a script exists. I've noticed that > rc5 is here already which partially has me balking at using a lot of > internet bandwidth to pull tons of sources in. > > Also if you have a specific list of things you'd like tested I may be able > to do this. Also what would be a good load test ? I've written my own very > simple load test ( timed while(0){i++;} sort of deal, but yeah. Also I will > be testing Nodejs following previously used steps( by me personally) to get > the latest Nodejs sources compiled and running on 3.8.x. > > I should be more active in this mater after this weekend . . . > > > On Wed, Oct 16, 2013 at 11:01 AM, Jason Kridner > <[email protected]>wrote: > >> I've booted it on Buildroot. Was going to try taking the same kernel >> and booting it on Angstrom as well, but haven't gotten there yet. >> >> Build output: >> https://s3.amazonaws.com/beagle/buildroot/2013-10-13-21%3A15%3A27/index.html >> >> Source: >> https://github.com/jadonk/buildroot/commit/5bcbc31f31a9f0b6941c522a3a50877326cb96d2 >> >> Planning on automating this as I have time. >> >> >> On Wed, Oct 16, 2013 at 11:40 AM, David Lambert <[email protected]> wrote: >> > Has anyone managed to get this kernel to work on the BBB? >> > >> > Regards, >> > >> > Dave. >> > >> > >> > On 13-10-12 07:43 PM, David Lambert wrote: >> >> >> >> I forgot to use earlyprintk :-[ Here is the screenlog with it enabled. >> >> >> >> On 13-10-12 04:21 PM, David Lambert wrote: >> >>> >> >>> On 13-10-11 02:51 PM, Robert Nelson wrote: >> >>>> >> >>>> >> >>>> ah... okay because uImage gets interesting in v3.12 >> >>>> >> >>>> make ARCH=arm LOADADDR=0x80008000 uImage >> >>>> >> >>>> Regards, >> >>>> >> >>> OK I got the kernel, modules and firmware to buid eventually (forgot >> >>> uboot-mkimage). >> >>> Commands used were: >> >>> >> >>> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- LOADADDR=0x80008000 >> >>> uImage dtbs >> >>> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- LOADADDR=0x80008000 >> >>> modules >> >>> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- >> >>> INSTALL_MOD_PATH=./tempmod LOADADDR=0x80008000 modules_install >> >>> >> >>> Now I am stuck at boot, see screenlog attached. >> >>> >> >>> >> >>> >> >>> Any ideas? >> >>> >> >>> Regards, >> >>> >> >>> Dave. >> >>> >> >>> >> >> >> > >> > -- >> > For more options, visit http://beagleboard.org/discuss >> > --- You received this message because you are subscribed to the Google >> > Groups "BeagleBoard" group. >> > To unsubscribe from this group and stop receiving emails from it, send >> an >> > email to [email protected]. >> > For more options, visit https://groups.google.com/groups/opt_out. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
