Press the button and hold it, then power on the board and see if that works. Otherwise the SD card may not be configured correctly..
Gerald On Thu, Oct 17, 2013 at 11:31 PM, <[email protected]> wrote: > hai ... > > I am working on BBB. I want to port opewrt on BBB. In order to boot from > SD card i removed the MLO in the fat partision of eMMC. I put the SD card > in micro SD card slot . I powered the Board and i pressed the button bove > thye slot but leds are off and not booting from SD card. I remove the SD > card and apply the power then also the four user leds are off , > > I tried with the BBB-flasher-2013.09.tar.xz but there is no booting > process , all the leds are off,,,,,, > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
