Thanks, but at your pin reference i can´t see which pins are SPI0 Clock and MOSI.
Am Montag, 21. Oktober 2013 16:34:59 UTC+2 schrieb Alex: > > Hi Guys, > > i hope someone can help me. > > After playing around with RaPi it is time now for BeagleBoard. > > So i bought me a BBB. > > I was a bit confused that there is only this google group and no forum in > a better "forum-style" what would be much better than this here. > Ok, so what... > > What i would like to do is: Get my WS2801 LED´s running on the BBB via > spidev > > That was no problem on my RaPi. > But here at the BBB it is complete different. I read a lot about > activating SPIDEV and it seems to be OK. i can activate SPI0 so i have > /dev/spidev1.0 and i can also activate SPI1 when i disable HDMI at the > optargs so i get /dev/spidev2.0 > > Next step are the wires. i need Clock and Data(MOSI) for the WS2801 LED´s. > Am i right that at SPI0 these are 18 and 22 at P9 ? > > i tried a lot of combinations and every time i connect the WS2801 and > activate the SPI0 the first LED is active and flashes orange. > > I am not a pro in programming but i hope i can find some help here. > > At the moment i use Debian Wheezy but i also tried the angstrom but i > prefere to use debian but if i have to, i will change back to angstrom. > > So, it would be great if someone can give me a help to geht these LEDs > wired and running. > > Regards > Alex > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
