Can you provide some details on the voltage rails and reset signals when in this state?
Gerald On Thu, Oct 24, 2013 at 12:47 PM, <[email protected]> wrote: > We are having a problem with a BBB that will not reliably boot from > shutdown after a power button is pressed. > In order to minimize power consumption we are shutting down the unit and > then using an external timer to bring the unit out of shutdown. On > approximately 1 out of 20 cycles the unit powers back up turns on one led > but nothing else happens and nothing is sent to the console port. The unit > will remain in this mode indefinitely and will not respond to power button > or reset button pushes. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
