How long is this pulse you are using to power off the board? Gerald
On Thu, Oct 24, 2013 at 2:48 PM, <[email protected]> wrote: > I have a BBB that will not reliably boot after shutdown -h now is issued. > In order to minimize power consumption between periodic events the unit > is shutdown and then restarted by an external clock that momentarily pulls > down the power button. Approximately 1/20 times the unit will turn the > power LED on boot never start the boot process where the LEDS are > flashing. The unit will not respond to either Power or reset buttons in > this mode. > > In this case, the power supply is always on > > Thank you for you assistance, > Jon > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
