I can't say what the issue is, but it sounds like it is running, so I don't see it being fried. I suggest you back up to the latest image and reflash it and see what is working.
http://circuitco.com/support/BeagleBoneBlack Gerald On Fri, Oct 25, 2013 at 9:11 AM, <[email protected]> wrote: > Please forgive me if this is the wrong place to start this. I am NuBee.*** > *** > > **** > > I got my BBB last week when I first connected it to the PC over the USB > the PC detected it and I could look at the files inside the BBB.**** > > lacking The cables I set it aside. The following day I loaded Angstrom ( I > think) on an 8 GB MMC plugged it into the BBB at connected it to the PC via > the USB cable but the BBB would not be detected by the PC > > **** > > I removed the MMC and tried again. The board goes through the sequence of > USR LEDs as usual (0 to 4) then the LEDs flash continuously but the PC > does not detect the board.**** > > **** > > Nothing else is connected to the BBB. **** > > **** > > Have I roasted by BB? Please help. I can buy another board but it takes > 20/25 days to get it (I live in the real boondocks) and I can hardly > wait.**** > > ** ** > > Thanks in advance. > > ** ** > > Azzy > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
