I power via USB ( USB 3.0 ), and I've had no such problems. I even boot via NFS / tftp.
On Mon, Oct 28, 2013 at 9:51 AM, Nick Glynn <[email protected]> wrote: > An oddity I had was that I required external power to the board for it to > boot over an NFS network connection as otherwise it would drop out and > sometimes fail while Booting Linux... > > - Nick > > > On 28 October 2013 16:49, William Hermans <[email protected]> wrote: > >> Try a different network cable. IF that doesnt fix it, try pressing down >> firmly on the ethernet jack on the BBB >> >> >> On Mon, Oct 28, 2013 at 9:26 AM, Felicia James <[email protected]>wrote: >> >>> Greetings, >>> >>> I'm a proud new owner of a BBB and still in the Newbie category when it >>> comes to terminal commands. I've been able to successfully boot my BBB >>> using Angstrom, I've even been able to connect to the internet (at first) >>> using an Ethernet cable. I have not been able to get the wifi to work - I >>> have the recommended Edimax wifi dongle (and know it works), but "opkg >>> update" is not successful. I tried switching to Ubuntu instead (which I am >>> more familiar and which I know how to connect to the internet...at least >>> with the desktop version). But, sudo apt-get update doesn't work, so I >>> can't install ubuntu-desktop either :( >>> >>> That's not the reason for this particular post though. >>> >>> About the third time I tried using the Ethernet, the connection kept >>> connecting and unconnecting. That's when I noticed that the green and >>> yellow network lights were not staying lit. Now, I cannot get them to light >>> at all. So, before I can address the problem with updating, I need a >>> network connection. >>> >>> Could there be something wrong with my board? Or, have I possibly messed >>> up a setting that "turned off" the Ethernet connector? >>> >>> I would appreciate some troubleshooting advice...currently, I have >>> Ubuntu flashed to the on board memory. If it helps, I'll switch back to >>> Angstrom. >>> >>> Thanks in advance for your assistance, >>> >>> Felicia >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
