You will not burn the board but Nothing will change because when powering the board by a usb port the software limits the current to some level and when this limit is exceeded then the board reboots. Therefore even if you give 100A to the usb port the pmic will limit it 29 окт. 2013 г. 9:47 пользователь "Illutian Kade" <[email protected]> написал:
> Ya, figured it was something wrong with the port. The AC Adapter works > fine; 5.1v on a meter. > > The board works fine; when powered by USB using the Debug Port. > > I wonder if I can use a 5v,2a "Fast Charger" port or if it'll burn out the > BBB's Debug Port.... > > On Monday, October 28, 2013 9:10:19 AM UTC-4, Gerald wrote: >> >> That would be a first! I suspect it may be a grounding issue. >> >> Gerald >> >> >> >> On Mon, Oct 28, 2013 at 7:45 AM, Illutian Kade <[email protected]> wrote: >> >>> UPDATE >>> >>> Appears the DC port on the board failed. >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard...@**googlegroups.com. >>> For more options, visit >>> https://groups.google.com/**groups/opt_out<https://groups.google.com/groups/opt_out> >>> . >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
