Hi Karinann, First of all install drivers which is find @ http://beagleboard.org/Getting%20Started web page, download and setup 32-bit installe for XP OS. Secondly only plug usb cable and open firefox explorer ( better than others- dont use internet explorer ) and type 192.168.7.2 .If you have already installed the drivers corretly, you will be inside of the board.You should follow the next steps which is shown on the web page. Regards,
Mete 29 Ekim 2013 Salı 01:58:16 UTC+2 tarihinde karinann yazdı: > > Hello Group: Please bear with me, as I'm really new to BeagleBoards, > I've been having a heck of time following the basic getting started > instructions and making them work or do what they > say is supposed to happen. I'm not really new to embedded systems, as > I've done quite a few hardware and software designs with Power PC > architecture over the years, but this little > wizard of a device has me baffled when it comes to the "bring up > documentation". First off, I'm using a Windows XP machine to access the > BeagleBoard Black using USB and the Ethernet Connection on board. The very > first time I tried powering up the board I seem to remember it responding > as per the getting started script on the BeagleBoard.org website, but I'm > not really sure. Right now I can use FireFox to get into the board via the > Ethernet connection. I don't have the serial to USB cable just yet so I > can't SSH or Telnet into the board on the serial port. I've downloaded > the Win32 drivers for the board per the getting started instructions. > First Question: If I have only the USB connection should I see the board > as a storage device or drive? If I should that is a problem I am having. > What I do see after plugging in the USB cable, after waiting for the board > to come up, is that in windows Explorer ( the file manager) I do see > another drive added but if I try to display its contents by clicking on the > drive, > (drive M: in my case) nothing at all happens within Windows Explorer. > There is also no recognition that a USB was even plugged in, within the > Icon Notification area of Windows. Second Question: Is there a more > detailed document or wiki that details the bring up sequence? I've been > looking around the support sites referenced on BeagleBoard.org, and have > not seen anything that might help. > If anyone is up to it I can do a WebEx session. Thanks, Regards, Karin > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
