If you read the release notes for Graphics_SDK_41_00_0_01 [1], it says ³This release is build tested against 3.8 kernel"
[1] http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/la test/index_FDS.html Regards, John From: John Syne <[email protected]> Reply-To: <[email protected]> Date: Tuesday, October 29, 2013 at 1:56 PM To: <[email protected]> Subject: Re: [beagleboard] SGX drivers on Kernel 3.8.13 > From: Micka <[email protected]> > Reply-To: <[email protected]> > Date: Tuesday, October 29, 2013 at 12:58 PM > To: <[email protected]> > Subject: Re: [beagleboard] SGX drivers on Kernel 3.8.13 > >> Well, I'm not sure because Alexander said : "It would be great if you could >> provide patches for the 3.8 kernel" and the TI guys replied with " These are >> to be applied againt kernel sources you are using" . > Hi Micka, > > Try to apply patches to the 3.8 kernel and you will get errors. > > Regards, > John >> >> >> Micka, >> >> >> On Tue, Oct 29, 2013 at 8:46 PM, John Syne <[email protected]> wrote: >>> >>> >>> From: Micka <[email protected]> >>> Reply-To: <[email protected]> >>> Date: Tuesday, October 29, 2013 at 5:33 AM >>> To: <[email protected]> >>> Cc: Robert Nelson <[email protected]>, Gerald Coley >>> <[email protected]> >>> Subject: Re: [beagleboard] SGX drivers on Kernel 3.8.13 >>> >>>> I strongly think that it's for the 3.8 kernel, But I'm waiting your >>>> confirmation :) >>> Looks like this patch is for the 3.12 kernel. >>> >>> Regards, >>> John >>>> >>>> >>>> On Tue, Oct 29, 2013 at 1:31 PM, Micka <[email protected]> wrote: >>>>> Hi Robert & Gerald, >>>>> >>>>> We have some news here : >>>>> http://e2e.ti.com/support/arm/sitara_arm/f/791/p/298596/1043947.aspx#10439 >>>>> 47 >>>>> >>>>> A new patch ? But my question, is it for the 3.2.x Kernel ? Or 3.8 ? >>>>> >>>>> micka, >>>>> >>>>> >>>>> On Mon, Oct 28, 2013 at 8:54 PM, John Syne <[email protected]> wrote: >>>>>> >>>>>> On 10/25/13, 11:44 AM, "Robert Nelson" <[email protected]> wrote: >>>>>> >>>>>>> >On Fri, Oct 25, 2013 at 1:39 PM, Michael Mullin <[email protected]> >>>>>>> >wrote: >>>>>>>> >> Is the 3.2 kernel SGX driver open source and simply too complex for >>>>>>>> the >>>>>>>> >> voluntary community to port to 3.8+ in their spare time (In which >>>>>>>> case >>>>>>>> >>we >>>>>>>> >> could start a kickstarter or something to fund someone to work full >>>>>>>> >>time on >>>>>>>> >> this bug)? Or is the driver proprietary, and the community is >>>>>>>> simply >>>>>>>> >>at the >>>>>>>> >> mercy of TI? >>>>>>> > >>>>>>> >Only the kernel "shim" is open source, well it also uses the in-kernel >>>>>>> >framebuffer driver to draw directly into.. >>>>>>> > >>>>>>> >To give you an idea of what we are dealing with, take a look at this: >>>>>>> >https://github.com/RobertCNelson/ti-sdk-pvr >>>>>>> > >>>>>>> >I try to copy the gpl bits from every sdk release, that a bunch of us >>>>>>> >can more easily patch the bits to later kernel releases's. >>>>>>> > >>>>>>> >In the case of the bone.. The 3.2 bits use the old frame buffer >>>>>>> >driver, and with 3.8/3.12 we are using the brand new and shiny kms >>>>>>> >driver.. >>>>>> Hey Robert, >>>>>> >>>>>> Here is some interesting info given that [1] shows that SGX is working >>>>>> over KMS on the OMAP5 and the GLSDK [2] used is based on Linux Kernel >>>>>> v3.8. >>>>>> >>>>>> [1] >>>>>> http://tigraphics.blogspot.in/2013/08/qt5-with-kms-omap5-jacinto6.html >>>>>> [2] >>>>>> http://processors.wiki.ti.com/index.php/OMAP5_GLSDK_6.01_Release_Notes >>>>>> [3] http://qt-project.org/forums/viewthread/23545 >>>>>> >>>>>> Regards, >>>>>> John >>>>>> >>>>>>> > >>>>>>> >Regards, >>>>>>> > >>>>>>> >-- >>>>>>> >Robert Nelson >>>>>>> >http://www.rcn-ee.com/ >>>>>>> > >>>>>>> >-- >>>>>>> >For more options, visit http://beagleboard.org/discuss >>>>>>> >--- >>>>>>> >You received this message because you are subscribed to the Google >>>>>>> Groups >>>>>>> >"BeagleBoard" group. >>>>>>> >To unsubscribe from this group and stop receiving emails from it, send >>>>>>> an >>>>>>> >email to [email protected] >>>>>>> <mailto:beagleboard%[email protected]> . >>>>>>> >For more options, visit https://groups.google.com/groups/opt_out. >>>>>> >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google Groups >>>>>> "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>>> email to [email protected] >>>>>> <mailto:beagleboard%[email protected]> . >>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google Groups >>>> "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to [email protected]. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected] >>> <mailto:beagleboard%[email protected]> . >>> For more options, visit https://groups.google.com/groups/opt_out. >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
