I've got an absolutely same problem, after booting usb0 is configured but in down state. Works only after Reset/Power buttons. I just need to login with keyboard/monitor and make ifconfig usb0 up. But I can't insert this command to the shell script started with systemd service (got SIOCGIFFLAGS error). Any suggestions on this case?
On Saturday, October 12, 2013 8:01:35 PM UTC+3, Jesper We wrote: > > Mmmm I thought maybe I should explain the intermittent part a bit, since > that's what's bugging me the most. > > About 50-70% of the time, when I power up the board after not having > worked with it for a while, I get the problem. I can't connect over ssh on > the usb line. I then normally press the reset button on the board, and when > it boots the second time it usually works. Once or twice I have needed a > second reset before it works. I usually try the ssh connection a little > while after having seen the Linux File-CD Gadget popping up. Waiting a > looong time after boot doesn't seem to help when it's not working. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
