How are you connecting to BBB? What Operating system are you running on
the host computer?
I had a similar problem and finally got it sorted out on my own. As an
example if you are using a Windows box for the host machine, plug the BBB
system into one of the USB ports on your computer, no Ethernet cable
attached at all. After about 5 to 10 seconds the LEDS on BBB should come
on solid then start to blink indicating the board is booting. Eventually
you should see an information window come up. In the Title bar of this
window it should be labeled something like "BeagleBone Getting Started"
followed by the drive letter assigned to BBB. Just cancel out of this
window. Then open a cmd window type ifconfig. You should see the BBB ip
address as the second Ethernet adapter. In my case it was assigned
192.168.7.1
Try this to see if it works for you.
Karin
On Monday, November 4, 2013 5:16:18 AM UTC-5, Tejvir Saggu wrote:
>
> Hey
>
> I am using beaglebone black with angstrom linux pre-installed on it. I am
> trying to connect to the board but i am not able to find its ip address.. I
> have tried each and every ip scanner possible but i still did'nt find
> anything. And i have checked the whole hardware its working right. Please
> can anybody help.!!!
>
> Tejvir Singh
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
