On Thu, Nov 7, 2013 at 1:55 AM, Jason Pratt <[email protected]> wrote: > hi everyone. > > i am having a serious problem, i had the BBB all setup and running using a > keyboard mouse and hdmi monitor. it worked fine, then i decided i wanted to > update using the instructions found here. > > i then downloaded 12.04 LTS from here and completed the install/flash > successfully as per the instructions. when i rebooted as per the link, > nothing appears and I get 3 solid LEDs. after waiting a few minutes with no > response, i removed the SD card and tried to reboot it to the onboard image, > but the same thing has happened. 3 solid LEDs. > > what am i doing wrong and how do i fix this?
idk... Use an image that's actually supported? http://elinux.org/BeagleBoardUbuntu#eMMC:_BeagleBone_Black Just make sure to hold down the "microSD" boot button as it sounds like you may have corrupted the bootloader.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
