Op donderdag 7 november 2013 16:19:58 UTC+1 schreef RobertCNelson: > > On Thu, Nov 7, 2013 at 8:50 AM, <[email protected] <javascript:>> wrote: > > Hi, > > > > Due to software dependencies I need to install Ubuntu 13.04 on the > > BeagleBoard-xM, but there is only a server install and no pre-installed > > desktop version as with 12.04. > > Use your network and run: "sudo apt-get install xyz-desktop".... >
Once I get it to work, I will use that... > > > I installed the installer on 1 sd card, then > > connected a cardreader with another sd (call it nr2) card to a usb port > and > > started installing 13.04. However, after installing and putting nr2 into > the > > sd card slot, it won't boot. This is probably because the device is set > to > > /de/sdc instead of /dev/mmcblk0p2 or so. So my question is: how can I > change > > the boot so that it boots from nr2 in the sd card slot. > > pastebin.com your "serial" boot log, uEnv.txt, & /etc/fstab > Can't find "serial" boot.log or uEnv.txt. But http://pastebin.com/UGGHDd38 has my /etc/fstab, which clearly shows how it was installed. No clue though by what it should be replaced > > Or just rebuild the image from scratch again with my "NetInstall" script.. > > https://github.com/RobertCNelson/netinstall > Thanks for the hint. > > (and select the "desktop" once the package selection screen popsup) > > Regards, hvn -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
