Robert, just for your info: after a day, I was unsuccessful with below.
So I decided to go back to an image install. From
http://www.armhf.com/index.php/getting-started-with-ubuntu-img-file/
I dfollowed the link to
http://www.armhf.com/index.php/download/
and downloaded
http://s3.armhf.com/debian/saucy/bone/ubuntu-saucy-13.10-armhf-3.8.13-bone28.img.xz
which I believe is your image file. I installed it my sd card using xz
-cd *.xz > dev/sdf
mounted the new sd card (looked fine), copied in my old
/etc/network/intefaces file
plugged it into my beagle and I am back where I was about 3 months ago
with all ports closed.
> nmap -A beagle
Starting Nmap 6.00 ( http://nmap.org ) at 2013-11-08 16:45 EST
Nmap scan report for beagle (192.168.1.128)
Host is up (0.0022s latency).
rDNS record for 192.168.1.128: beaglebone.local
All 1000 scanned ports on beagle (192.168.1.128) are closed
Service detection performed. Please report any incorrect results at
http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 0.20 seconds
>
If I plug in my bone20 sd card and do the same, I get
> nmap -A beagle
Starting Nmap 6.00 ( http://nmap.org ) at 2013-11-08 16:54 EST
Nmap scan report for beagle (192.168.1.128)
Host is up (0.0021s latency).
rDNS record for 192.168.1.128: beaglebone.local
Not shown: 999 closed ports
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 6.1p1 Debian 4 (protocol 2.0)
| ssh-hostkey: 1024 5d:84:2e:7c:c4:1a:10:ee:1c:d3:97:76:66:b5:92:8f (DSA)
|_2048 08:8b:d8:8e:4c:fc:d2:74:f1:46:e9:6e:b8:28:eb:ab (RSA)
Service Info: OS: Linux; CPE: cpe:/o:linux:kernel
Service detection performed. Please report any incorrect results at
http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 0.55 seconds
>
so I believe my network is fine.
I have no idea why I can't connect with your images, but without being
able to connect, I have no way of figuring out what is going wrong. Any
thoughts on
uEnv.txt not being compatible. Any thoughts about the best way to try
and get a serial usb link going? I will keep trying, but am totally lost
on what to do. Everything seems to be going right until I try to login
in over the internet. Your image seems to boot up fine, with the lights
doing the right things, and booting down after 10 seconds when holding
the reset key down etc., just can't get into it over the ethernet.
-Ken
On 13-11-07 06:00 PM, Robert Nelson wrote:
On Thu, Nov 7, 2013 at 4:49 PM, Bit Pusher <[email protected]> wrote:
I am interesting in downloading and upgrading my kernel to Linux
ubuntu-armhf 3.8.13-bone28 from Linux ubuntu-armhf 3.8.13-bone20.
If it helps, since it sounds like your starting over to "upgrading"
your system, this time maybe start with an image with easy kernel
upgrades?
http://elinux.org/BeagleBoardUbuntu#Demo_Image
(or if your in a none linux environment..)
http://elinux.org/BeagleBoardUbuntu#eMMC:_BeagleBone_Black
as kernel upgrades are as easy as:
wget http://rcn-ee.net/deb/raring-armhf/v3.8.13-bone28/install-me.sh
sudo /bin/bash install-me.sh
I have been working in 20 for a few months and have installed quite a few
applications. Are there any directions on:
1) Listing current apt-get packages that need to be re-installed (without
listing dependencies).
dpkg --get-selections > /backup/installed-software.log
sudo aptitude install $(cat /backup/installed-software.log)
2) What directories besides /etc, /home, /lib/firmware and /boot, etc should
be backed up and re-copied to new system
ignore /boot/ the new image should populate the bootloader...
3) Any other considerations for the backup.
This could be a good area for a tutorial; any takers? I could try, but I'm
not knowledgeable enough in kernel/driver issues.
Related question: how often should one be considering going through this
process? Can it be scripted? Thanks.
ah, store your application/scripts off the device and into a private
git/github/etc location... ;)
Regards,
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
