Hi All, I would like set-up a web server lighttpd on beaglebone black. i have tried with following approaches:
1) first tried with installing package through opkg opkg update opkg install lighttpd but above process gets hung at "Configuring lighttpd" message. i have waiting for 3-4 hours but it still stuck at this point. 2) Then I have decided to go with source code compilation. I have downloaded the source code and tried to cross compile it as per the reference link "http://www.ridgesolutions.ie/index.php/2013/06/05/build-cross-compile-lighttpd-for-arm-linux-with-pcre/";. In this link, I have modified configuration command as: ./configure --prefix=/home/user/build_lighttpd/build_pcre/_install --build=i386-linux --host=arm-linux --target=arm-linux CC=/usr/local/angstrom/arm/bin/arm-angstrom-linux-gnueabi-gcc AR=/usr/local/angstrom/arm/bin/arm-angstrom-linux-gnueabi-ar STRIP=/usr/local/angstrom/arm/bin/arm-angstrom-linux-gnueabi-strip RANLIB=/usr/local/angstrom/arm/bin/arm-angstrom-linux-gnueabi-ranlib LDFLAGS=/usr/local/angstrom/arm/bin/arm-angstrom-linux-gnueabi-ld It configured successfully without any error (I have modified this command because I was getting an error with the original command given in the link). But after that, when I apply make command, I am getting an error: "./.libs/libpcre.so: could not read symbols: File in wrong format". Can you guys please add your inputs in this stuff. If I am following wrong reference link for cross compilation, please suggest the appropriate one. Thanks, Ashish -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
