OK, so then everything is working now? Gerald
On Wed, Nov 13, 2013 at 11:00 AM, Gerald Coley <[email protected]>wrote: > Good. So make sure you pres the boot button to force the uSD boot. You > have stuff hanging off the eMMC that is > most likely confusing the processor. Even if you disable it, it still tries > to boot from eMMC because until l the SW is loaded and running it cannot > put the eMMC into reset per the uENV.txt file. This is why I said to hold > off driving those pins until after the SW is running. > > In addition the lower part of P8, that is the boot pins. DO not interfere > or use or drive those pins until after the processor has booted. It will > mess up the boot order. Do not enable the FPGA until after the > processor has booted. > > Gerald > > > > On Wed, Nov 13, 2013 at 10:46 AM, Alberto Potenza < > [email protected]> wrote: > >> Hi Gerald, >>> >> actually I've already disabled eMMC: >> In fact, I obtain: >> root@arm:/# cat /sys/devices/bone_capemgr.9/slots >> 0: 54:PF--- >> 1: 55:PF--- >> 2: 56:PF--- >> 3: 57:PF--- >> 4: ff:P-O-- Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G >> 5: ff:P-O-- Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI >> 6: ff:P-O-- Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN >> 7: ff:P-O-L Override Board Name,00A0,Override Manuf,BB-GPMC-001 >> >> where the only configuration loaded is the GPMC written by me. >> >> There is also my uEnv.txt...maybe I am missing something... >> >> >> Thanks for your help. >> >> Alberto >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
