You can look at the BeagleBone Black schematic and it shows the RGB information. It is on page 10.
http://www.elinux.org/Beagleboard:BeagleBoneBlack#LATEST_PRODUCTION_FILES_.28A6.29 Gerald On Wed, Nov 13, 2013 at 1:10 PM, Kim Ilchul <[email protected]> wrote: > Hello people,16 bi > I'm a new with beaglebone black and working on it for my project. I'm > using a TFT-Proto LCD display that connected to BBB. The problem I having > now is that lack of information for this LCD display. A datasheet only > gives me how to set the 565 16 bits, never tell me which pin is belongs to > R,G,B and goes to where. So far, I just set user interface pin(IM0 ~ 3) as > 1000 which is 565 16bits and connect them to BBB's LCD_Data 0 to 15 > directly. (Not sure this connection is correct) A backlit works but nothing > comes up on the screen. Anyone can give some anything for it? Thanks. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
