On Monday, November 11, 2013 10:38:00 AM UTC+5:30, [email protected] wrote: > > Hi, > > I have Beaglebone Black and We have followed the procedures as mentioned > in the website http://beagleboard.org/Getting%20Started#update to boot > the OS we are not facing any problem with booting up its working well. > > In order to use the LCD we have disabled HDMI also . > The LCD which we are using is a 5.7" LCD with 16bpp RGB interface mode. > > We have made some changes to the existing device tree given for > "cape-bone-LCD3-00A0.dts". > > We are able to set all the required parameters to LCD interface like Pixel > Clock, HSync, and VSync we are getting proper output on this pin, only > issues is that the Data Enable (DE) signal its not coming properly, so we > are not very sure the OS is actually transferring the data to LCD are not, > So can I know the reason for this and also solution for this. > Thank you. >
Check the LCD DE pin is muxed for any other purpose. And i have questions of 1. What you getting in dmesg? 2. Is the LCD dtb0 is loaded? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
