Hello, First a little bit of a background:
I have a beaglebone black connected to the mains with a 5V, 1A DC power supply. I'm running an Xbee USB adapter board (http://goo.gl/ygIboV), and an XBee 900HP (http://goo.gl/0ZhtM6<http://digi.com/products/wireless-wired-embedded-solutions/zigbee-rf-modules/point-multipoint-rfmodules/xbee-pro-900hp>) on the USB port. It's running stock Angstrom Linux. The problem is this: About every 24 hours, the lights on my Xbee adapter board turn off and the device is nowhere to be seen on my lsusb output. Usually I can still ssh into the board after this happens. After a reboot, the board is fine for another 24 hours before the same thing happens again. I have a hunch that the problem is the power supply, but is there anything else I could try before I go out and buy a new, more powerful supply? My other question is why would the Xbee work at all if the problem is in fact a power supply that isn't strong enough? Thanks, Kent Friesen -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
