Plug in FTDI module to usb host
Power up beagle
enter the following command:
modprobe usbserial vendor=0x0403 product=0x6001
Hopefully after a second or so you will see a new entry in the dev
directory.
On Saturday, November 16, 2013 9:07:25 AM UTC+11, [email protected] wrote:
>
> Hi,
>
> I working on a project where I need to use the USB host interface to
> connect a FTDI module. The problem is that I can't see the ttyUSB0. If I
> do lsusb this is what I get:
>
> Bus 001 Device 002: ID 0403:6001 Future Technology Devices International,
> Ltd FT232 USB-Serial (UART) IC
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
> So the FTDI module is loaded, but still can't see the ttyUSB0. The kernel
> version is 3.8.13. Does anyone have any advice on how to make this work? Do
> I need to add a bone_cape or something else?
>
> Richard
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
